GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 500-BODX21 |
Series: | 500 |
Description:
The Allen Bradley 500-BODX21 is a contactor modular kit. The coil of this device is rated at 110 to 120 volts at 50 to 60 hertz. It has a maximum rated voltage of 600 volts AC at 60 hertz, as well as a maximum load current of 27 amperes. It is equipped with one (1) normally auxiliary contact, top-wired connections, and a NEMA 1 open-type enclosure. This device measures 193 millimeters x 125 millimeters x 113 millimeters. The weight of this product is approximately 2.2 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 500-BODX21 is a contactor modular kit by Allen Bradley. It is a coil motor starter for 1-phase and 3-phase motors. It has a NEMA size of 1. Its base contactor comes with a coil that has a nominal voltage rating of 110 volts at 50 hertz and 120 volts at 60 hertz. It can work with a maximum of 600 volts AC at 60 hertz. This product has a maximum load current rated at 27 amperes. This device is equipped with one (1) normally open (NO) auxiliary contact and can have a maximum of up to 8 auxiliary contacts. It has top-wired connections. The enclosure of this product is that of an open type. It supplies maximum power of 2 horsepower at 115 volts and 3 horsepower at 230 volts for a one-phase, one-pole motor. It provides a maximum power of 7.5 horsepower at 200 volts, 7.5 horsepower at 230 volts, and 10 horsepower at 460 to 575 volts for a 3 phase, 3- to 5-pole motor. It has mechanical life of ten million (10,000,000) operations. It has an average pick-up operating time of 22 milliamperes and an average drop-out operating time of 14 milliseconds. Its power contacts are made of silver alloy, while its auxiliary contacts are made of silver. This product has wired power terminals with a wire size of # 14 AWG to # 10 AWG. The Allen Bradley 500-BODX21 has physical dimensions that measure 193 millimeters x 125 millimeters x 113 millimeters (height x width x depth). The weight of this product is approximately 2.2 kilograms.
Question: Does Automation Stop offer repairs on the 500-BODX21?
Answer: Yes. We offer repairs for the 500-BODX21 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 500-BODX21?
Answer: If you buy the 500-BODX21 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 500-BODX21 online?
Answer: Yes. Automation Stop sells the 500-BODX21 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 500-BODX21?
Answer: The 500-BODX21 is made by Allen Bradley - Miscellaneous.
Question: What voltage does the 500-BODX21 have?
Answer: The 500-BODX21 by Allen Bradley - Miscellaneous has a voltage of 600.
For additional information about 500-BODX21 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 500-BODX21.
Revision Part # | Also Known As | Availability |
---|---|---|
500-BODX21/A | 500-BODX21 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.