509-COD-A5J

Part number 509-COD-A5J is a starter device that was produced by Allen Bradley. It belongs to the Bulletin 509 product line of non-reversing full voltage starters. It provides three-phase motor control through one motor contactor, opening and closing the power circuit to turn the motor on and off. the most common application for this device is to operate conveyors, pumps, blowers, fans, cranes, hoists, and rock crushers.  The starter size according NEMA is size 5 and it is present SMP-1 Solid-state overload relays for motor protection. The relay is self-powered, has a wide adjustment range (3.2:1), ambient temperature compensation, visible trip indicator, and phase loss protection. The starter is operated from pilot devices, two or three wire-like push buttons, float switches, thermostats, pressure, snap, or limit switches. Additionally, the starter can be equipped with a communication module.

The device can accept one (1) to four (4) auxiliary contact blocks of the user’s choice, which can provide in total six (6) auxiliary contacts. The available auxiliary contact blocks are 1 normally open (NO), 1 normally closed (NC), 1 normally closed (NC) late break, 1 normally open (NO)-1 normally closed (NC), 2 normally open (NO), and 2 normally closed (NC). The starter has snap-together wiring technology, which consists of wiring sleeve-cover corresponding to color label on the terminal block. This technology allows quicker installation times and reduces wiring errors. The starter expected mechanical lifetime is five million (5,000,000) operations. It has an operating temperature range from -13 to 131 degrees Fahrenheit (-25 to 55 degrees Celsius). The starter dimensions in type 1 general purpose enclosure are 50 inches x 22 inches x 11.19 inches (1270 millimeters x 559 millimeters x 284 millimeters) and weighs approximately 250 pounds (113.4 kilograms).