GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

592-EC2AC

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 592-EC2AC
Series: 592

Description:

The Allen-Bradley 592-EC2AC solid-state relay protects squirrel-cage induction motors for a wide variety of electrical anomalies. It is factory set for three-phase motors, but it can be configured for single phase motors as well.


Key Features:

  • utilizes 690 volts ac rated insulation voltage

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$2,946.00

Available: 4

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The microprocessor-based multi-function solid-state electronic overload relay 592-EC2AC by Allen-Bradley has a current rating of 18 to 90 Amperes and a contactor size of 2. It protects squirrel-cage induction motors from power supply anomalies such as overload, phase loss, ground fault, stall, jam, underload, current imbalance, communication fault or idle, remote trip, blocked start or start inhibit, under or over voltage, voltage unbalance, phase rotation, under or over frequency, under or over real, reactive or apparent power, under or over power factor lagging, and power value overflow. The factory settings are for a three-phase motor and can be switched to single-phase if required. The relay is rated for an insulation voltage of 690 Volts of alternating current and a frequency of 20 to 250 Hertz. It has a DeviceNet connector and requires a power supply of 24 Volts of direct current with an operating range of 11 to 25 Volts of direct current. The maximum surge current allowable at power up is 3 Amperes. The maximum power consumption rate is 3.2 Watts and power interruption is allowable for up to 1 millisecond at 11 Volts DC and 10 milliseconds at 25 Volts DC. The thermal current rating is 5 Amperes and output insulation voltage is 300 Volts AC; operating voltage is 240 Volts AC. The minimum operating current is 10 milliamperes at 5 Volts DC. The trip relay is rated for up to one million operations. The communication baud rate ranges from 125k to 500k and it has auto baud rate identification, polled I/O messaging, change of state messaging, cyclic messaging, and full parameter object support.

Technical Specifications

Product type Solid-state relay
Current rating 18 to 90 Amperes
Contactor size 2
Rated insulation voltage 690 Volts AC
Rated impulse voltage 6 Kilovolts
Rated frequency 20 to 250 Hertz
Number of poles 3
Application Single or three phase
Rated supply voltage 24 Volts DC
Operating range on supply voltage 11 to 25 Volts DC
Maximum surge current at power-up 3 Amperes
Max. power consumption 3.2 Watts
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 592-EC2AC?

Answer: Yes. We offer repairs for the 592-EC2AC and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 592-EC2AC?

Answer: If you buy the 592-EC2AC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 592-EC2AC online?

Answer: Yes. Automation Stop sells the 592-EC2AC online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 592-EC2AC?

Answer: The 592-EC2AC is made by Allen Bradley - Miscellaneous.


Question: What Application does the 592-EC2AC have?

Answer: The 592-EC2AC has a Single or three phase Application.


Question: What contactor component size does the Allen-Bradley 592-EC2AC have?

Answer: The contactor unit size of the 592-EC2AC is 2.


Question: What is the Current rating of the 592-EC2AC?

Answer: The Allen Bradley Automation 592-EC2AC has a Current rating of 18 to 90 Amperes.


Question: What Max. power consumption does the 592-EC2AC have?

Answer: The Max. power consumption of the 592-EC2AC is 3.2 Watts.


Question: What is the Maximum surge current at power-up of the Rockwell Automation 592-EC2AC?

Answer: The Maximum surge current at power-up of the 592-EC2AC is 3 Amperes.


Question: What is the Number of poles of the Allen Bradley Automation 592-EC2AC?

Answer: The Number of poles of the 592-EC2AC is 3.


Question: What Operating range on supply voltage does the 592-EC2AC have?

Answer: The Allen Bradley-Rockwell Automation 592-EC2AC has a Operating range on supply voltage of 11 to 25 Volts DC.


Question: What Product type is included with the Allen-Bradley 592-EC2AC?

Answer: The Allen-Bradley 592-EC2AC has a Solid-state relay Product type.


Question: What Rated frequency does the 592-EC2AC have?

Answer: The Rated frequency of the Allen Bradley Automation 592-EC2AC is 20 to 250 Hertz.


Question: What is the Rated impulse voltage of the 592-EC2AC?

Answer: The 592-EC2AC has a Rated impulse voltage of 6 Kilovolts.


Question: What Rated insulation voltage does the Allen Bradley 592-EC2AC have?

Answer: The Allen Bradley 592-EC2AC has a Rated insulation voltage of 690 Volts alternating current (AC).


Question: What is the Rated supply voltage of the Allen Bradley-Rockwell Automation 592-EC2AC?

Answer: The Rated supply voltage of the 592-EC2AC is 24 Volts direct current (DC).


Series information for 592-EC2AC

For additional information about 592-EC2AC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 592-EC2AC.

Revision Part # Also Known As Availability
592-EC2AC/A 592-EC2AC Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • S92-EC2AC

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP