GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 595-AB |
Series: | 595 |
UPC: | 10781180156424 |
Description:
The 595-AB is an auxiliary contact block containing 1 normally open and one normally closed contact, and is used alongside Bulletin 509 modules of series A, B, C, D, E and F. This device has a NEMA size rating from 0 to 5. The maximum continuous current of this device is 18 amperes. Additionally, this product has a power usage rating of 3 horsepower (Hp) at 200 to 230 volts alternating current (AC). The maximum power usage of this device, however, is 5 Hp at 480 to 575 volts alternating current (AC).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley brand auxiliary contact block 595-AB contains the relay’s auxiliary contacts. It contains 1 normally open contact and 1 normally closed contact, and is used alongside Bulletin 509 modules of series A, B, C, D, E and F. It is mounted on the side and the National Electrical Manufacturer Association sizes are from 0 to 5. For NEMA size 0, the maximum current is 18 amperes (continuous) and has a power usage rating of 3 horsepower at 200 to 230 volts alternating current (AC). The maximum power usage at 480/575 volts alternating current (AC) is 5 horsepower.
For NEMA size 1, the continuous current at maximum value is rated as 27 amperes, whereas the power usage at maximum while working under an alternating current voltage of 200/230 volts is 7.5 amperes. Under the voltage, 480/575 volts AC, the maximum power usage is 10 horsepower.
For NEMA size 2, the maximum horsepower rating for the device at 200 volts AC, 230 volts AC, and 480/575 volts AC is 10 horsepower, 15 horsepower, and 25 horsepower respectively. The continuous current at maximum is rated at 45 amperes
For NEMA size 3, the continuous current at maximum is rated as 90 amperes, whereas the maximum power consumption is 25 Hp at 200 volts AC, 35 Hp at 230 volts AC, and 50 Hp at 480 to 575 volts AC.
The maximum continuous current supply for NEMA size 4 and 5 is rated as 135 amperes and 270 amperes respectively. The device should be in OFF position during installation of controller.
Question: Does Automation Stop offer repairs on the 595-AB?
Answer: Yes. We offer repairs for the 595-AB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 595-AB?
Answer: If you buy the 595-AB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 595-AB online?
Answer: Yes. Automation Stop sells the 595-AB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 595-AB?
Answer: The 595-AB is made by Allen Bradley - Miscellaneous.
For additional information about 595-AB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 595-AB.
Revision Part # | Also Known As | Availability |
---|---|---|
595-AB/A | 595-AB Ser A, Series A, Rev A | Request a Quote |
595-AB/B | 595-AB Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.