GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700DC-P800DZ24 |
Series: | 700DC |
Description:
Product number 700DC-P800DZ24 is an industrial control relay that was designed and manufactured by Allen Bradley / Rockwell Automation. This device is used for heavy-duty functions within various industries. This device is easy to use and provides enhanced safety functionalities. This product has a total of eight (8) normally open (NO) contacts. It has a rated control voltage of 24 volts DC. The contact current rating is 10 amperes. This relay can be DIN rail mounted and has an open-type enclosure.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 700DC-P800DZ24 is an industrial control relay which works by controlling a circuit in an electrical device by opening or closing a different circuit contacts. It is used for heavy duty functions in various industries. This device was designed and produced by the company known as Allen Bradley / Rockwell Automation. This product was designed to offer ease in applications and enhanced safety functionality. This device has a total of eight (8) normally open (NO) contacts. It has a rated control voltage of twenty-four (24) volts direct current (DC). The contact current rating of this Allen Bradley device is 10 amperes via an alternating current (AC) input. This device has a total of eight (8) poles. The maximum power used by this control relay is indicated as 600 volts direct current (DC). The coil rating of this device is 32 volts direct current (DC). This industrial control relay is capable of being mounted via a DIN rail. Additionally, the enclosure of this device is that of an open type. This means that the enclosure offers protection to the electrical components that are sensitive, but it does not offer protection against the intrusion of foreign matter, such dust and tiny particles, as well as moisture. Therefore, the device is only limited to indoor use.
The device is also CE listed to mean that it meets the highest environmental, health and safety requirements for it to be sold within the European Economic area. It has also been tested in the Underwriter Laboratory and is approved for certifications by the manufacturers. Therefore, this industrial control relay is UL listed.
Question: Does Automation Stop offer repairs on the 700DC-P800DZ24?
Answer: Yes. We offer repairs for the 700DC-P800DZ24 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700DC-P800DZ24?
Answer: If you buy the 700DC-P800DZ24 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700DC-P800DZ24 online?
Answer: Yes. Automation Stop sells the 700DC-P800DZ24 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700DC-P800DZ24?
Answer: The 700DC-P800DZ24 is made by Allen Bradley - Miscellaneous.
Question: What voltage does the Allen Bradley - Miscellaneous 700DC-P800DZ24 have?
Answer: The 700DC-P800DZ24 by Allen Bradley - Miscellaneous has a voltage of 600.
For additional information about 700DC-P800DZ24 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700DC-P800DZ24.
Revision Part # | Also Known As | Availability |
---|---|---|
700DC-P800DZ24/A | 700DC-P800DZ24 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.