GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700DC-R800Z24 |
Series: | 700DC |
Description:
The 700DC-R800Z24 sealed switch relay is designed for use in highly harsh, contaminated, and hazardous situations. The hermetically sealed & tungsten-tipped contacts in this relay ensure that low voltage currents are switched with reliability. This relay is manufactured without a moving armature that modifies the contact state. Therefore, it has a relatively long life. It has a 1.5 million cycle electric service life at 5 amperes and 120 volts alternating current (AC). This drive has a coil voltage pickup of 80 to 100 percent direct current (DC) coils. It is also UL, CSA, and CE certified.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 700DC-R800Z24 is a NEMA industrial relay belonging to the sealed switch relay family. It is a direct current (DC) operated sealed switch relay featuring a twenty-four (24)-volt direct current coil voltage, eight (8) contacts that are normally open (N.O.) and zero (0) contacts that are normally closed (N.C.). Furthermore, a five (5)-ampere continuous rating at 300 volts alternating current (AC) and a 2.5-ampere continuous rating at 600 volts alternating current (AC) are its current ratings. In terms of environmental specifications, it operates in a class 1 & division 2 hazardous location. This Allen-Bradley sealed switch relay has replaceable contact cartridges and can accept up to eight (8) poles. Furthermore, the 700DC-R800Z24 sealed switch relay can be used in hard, unclean, and hazardous settings. It has a long life because it does not need a moving armature to alter the contact state, which helps to lengthen the product's life. Switching currents, high voltage, creating connections between more than two system voltages, delivering isolation from output solid-state leakage current, and simultaneously controlling devices are all ideal applications for the 700DC-R800Z24 sealed switch relay. Moving on, the operational specifications of this sealed switch relay are as follows: its contact material type is tungsten, it features a max resistive alternating current of 5 amperes, its minimum load at 5 volts is 1 milliamperes, it features a coil voltage pickup of 80 to 100% direct current coils, and its electric service life is 1.5 million cycles at 5 amperes, 120 volts alternating current. Additionally, this Allen-Bradley sealed switch relay is certified by the UL, CSA, CE standards for panel or rail mounting.
Question: Does Automation Stop offer repairs on the 700DC-R800Z24?
Answer: Yes. We offer repairs for the 700DC-R800Z24 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700DC-R800Z24?
Answer: If you buy the 700DC-R800Z24 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700DC-R800Z24 online?
Answer: Yes. Automation Stop sells the 700DC-R800Z24 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700DC-R800Z24?
Answer: The 700DC-R800Z24 is made by Allen Bradley - Miscellaneous.
For additional information about 700DC-R800Z24 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700DC-R800Z24.
Revision Part # | Also Known As | Availability |
---|---|---|
700DC-R800Z24/A | 700DC-R800Z24 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.