GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800F-N3W |
Series: | 800F |
Description:
Part number 800F-N3W is an LED, or light emitting diode, lamp. This device, which was designed and manufactured by Allen Bradley / Rockwell Automation, features a white lamp for its LED. This device has a NEMA rating of 4X, 13, and 4, with an IP rating of IP66. The voltage rating of this device is 24 volts AC/DC. This Allen Bradley device may be mounted via a latch. The weight of this product is approximately 12 ounces.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 800F-N3W is an integrated LED lamp with a white led lamp. It belongs to the Bulletin 800F product line. Its NEMA type is 4X, 13, and 4. It also meets the IP66 standards for safety and protection, making this product perfect for use indoors and outdoors. Its size is 22.5 mm. This lamp is used with plastic material. It is available in standard packaging with ten (10) products per box. This power module uses an integrated LED (light emitting diode). It is a compact and energy efficient product by Allen Bradley / Rockwell Automation. It is straightforward when it comes to installation. Any human contact with this module is not hazardous, but at the same time, to ensure correct mounting, the proper awareness of its usage is necessary to avoid any damage. It is not an ESD-sensitive product. This module uses a smart diode for its lamp that consumes less power. Users can mount this unit easily with latch-style mounting. As far as its power requirement is concerned, it operates on 24 volts, which it can get from either AC or DC power supply sources. The manufacturers ship this lamp in standard packaging to prevent any damage due to the logistics. The dimensions of this lamp are 0.28 inches x 0.28 inches x 0.24 inches, and it weighs approximately 12 ounces. The current status of this LED lamp is active. The Bulletin 800F product line is a reputable series for accessories such as lamps and pushbuttons. It also features other accessories for a wide range of machine equipment.
Question: Does Automation Stop offer repairs on the 800F-N3W?
Answer: Yes. We offer repairs for the 800F-N3W and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800F-N3W?
Answer: If you buy the 800F-N3W through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800F-N3W online?
Answer: Yes. Automation Stop sells the 800F-N3W online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800F-N3W?
Answer: The 800F-N3W is made by Allen Bradley - Miscellaneous.
For additional information about 800F-N3W check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800F-N3W.
Revision Part # | Also Known As | Availability |
---|---|---|
800F-N3W/A | 800F-N3W Ser A, Series A, Rev A | Request a Quote |
800F-N3W/B | 800F-N3W Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.