GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800H-1HVX7 |
Series: | 800H |
Description:
The 800H-1HVX7 is an enclosure base designed and manufactured by Rockwell Automation / Allen-Bradley for use with 800H 7 and 9 series pushbutton with specifications of � inch dead end, 1 Gang Deep for hazardous locations. Made from Aluminum, the 800H-1HVX7 was designed and manufactured to meet specific requirements set by the National Electrical Code for Class 1 Hazardous gas, Class 2 Hazardous dust, and Class 3 Hazardous Fiber locations. Components mounted in this enclosure are of standard barrel format suited for mounting on panels with thickness up to 25.4 millimeters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part Number 800H-1HVX7 is Allen-Bradley’s Bulletin 800H Hazardous location enclosure base for push buttons of type 7 and 9. Designed for enclosure use, it is designed from copper free die-cast Aluminum bushings and mounting rings (lower than 0.4 percent copper), type 316 stainless steel shafts together with an O-ring seal for additional resistance to corrosion. Components of the pushbutton can be mounted on to a ¾ inch threaded hole of a well-suited enclosure. With suitability for 25.5 mm gauge panels mount, it provides a peculiar locking bracket which is an anti-turn mechanism for keeping the operator firm in place. Additionally, a second way of making each unit tightly fastened to the panel is by knurling the mounting rings at the front of the panel.
Allen-Bradley’s 800H-1HVX7 is a single gang deep model which meets requirements for application for Hazardous gas Class 1, Divisions 1 and 2, Groups B, C and D; Hazardous dust Class 2, Divisions 1 and 2, Groups E, F and G; and Hazardous Fiber Class 3 locations. In addition, it is not designed for outdoor use, thus a Type 3 rating is available while still maintaining its Type 7 and 9 ethics for enclosures by adding a type 3 sealing flange and a standard approved drain. Several sealing options are available for Part Number 800H-1HVX7 on installation of push button. The use of a flange for sealing eliminates the need for a conduit seal. In addition, sealed switch contact blocks can be used to eliminate the necessity of a conduit seal fitting for a lot of push button applications.
Question: Does Automation Stop offer repairs on the 800H-1HVX7?
Answer: Yes. We offer repairs for the 800H-1HVX7 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800H-1HVX7?
Answer: If you buy the 800H-1HVX7 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800H-1HVX7 online?
Answer: Yes. Automation Stop sells the 800H-1HVX7 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800H-1HVX7?
Answer: The 800H-1HVX7 is made by Allen Bradley - Miscellaneous.
For additional information about 800H-1HVX7 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800H-1HVX7.
Revision Part # | Also Known As | Availability |
---|---|---|
800H-1HVX7/A | 800H-1HVX7 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.