GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800H-UR13 |
Series: | 800H |
Description:
The Allen Bradley 800H-UR13 is a potentiometer from the 800H product series. This device is compatible with pushbuttons from the 800T series of products. This potentiometer has a NEMA rating of NEMA 4/4X/13. The rated voltage of this unit is 300 volts AC/DC. The minimum DC voltage rating of this device is 6 volts DC. It has a power rating of 2 watts. The size of this device measures 30.5 millimeters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 800H-UR13 is a potentiometer device as part of the Bulletin 800H series of products. This device was designed and manufactured by Allen Bradley. It is used for phase loss and imbalance protection. The enclosure rating of this unit is NEMA 4/4X/13; therefore, its type is referred to as 4/4. The resistive element of this potentiometer is one thousand (1000) ohms. It is primarily built to integrate with the 800H push buttons and is a reputable Allen Bradley module due to its universal application and management flexibility. Furthermore, it has one hundred and fifty (150) kilo-ohm resistance with a resistive element. Without a resistive element, this potentiometer has a resistance rating of one thousand (1000) ohms. However, the product characteristics vary depending on the product series. The 800H line is well known for the following product applications. For example, these potentiometers are designed to provide single turn operations with three hundred and twelve degrees (312°) rotation. Moreover, the power requirement of these products in terms of AC (alternating current) and DC (direct current) voltage class can reach up to three hundred (300) volts. Additionally, the maximum rated power of this device is two (2) watts, while the minimum DC (direct current) voltage rating is six (6) volts DC. The size of this Allen Bradley potentiometer measures 30.5 millimeters (mm). The user manual contains additional product information, particularly technical and environmental factors relating to this Allen Bradley potentiometer's setting, storage, and day-to-day operations. It is important to note that this device has been discontinued by Allen Bradley.
Question: Does Automation Stop offer repairs on the 800H-UR13?
Answer: Yes. We offer repairs for the 800H-UR13 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800H-UR13?
Answer: If you buy the 800H-UR13 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800H-UR13 online?
Answer: Yes. Automation Stop sells the 800H-UR13 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800H-UR13?
Answer: The 800H-UR13 is made by Allen Bradley - Miscellaneous.
For additional information about 800H-UR13 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800H-UR13.
Revision Part # | Also Known As | Availability |
---|---|---|
800H-UR13/A | 800H-UR13 Ser A, Series A, Rev A | Request a Quote |
800H-UR13/B | 800H-UR13 Ser B, Series B, Rev B | Request a Quote |
800H-UR13/C | 800H-UR13 Ser C, Series C, Rev C | Request a Quote |
800H-UR13/D | 800H-UR13 Ser D, Series D, Rev D | Request a Quote |
800H-UR13/E | 800H-UR13 Ser E, Series E, Rev E | Request a Quote |
800H-UR13/F | 800H-UR13 Ser F, Series F, Rev F | Request a Quote |
800H-UR13/G | 800H-UR13 Ser G, Series G, Rev G | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.