GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800S-2SC |
Series: | 800S |
Description:
The Allen-Bradley 800S-2SC is a conventional duty station with pushbuttons. This setup consists of up and down momentary contact buttons of type 1. This pushbutton is from Series M, which is a heavy-duty pushbutton. This device has a contact rating of 5 amperes at 600 volts AC. The enclosure of this device is that of a NEMA Type 1. This device has custom-built stations and may be mounted horizontally or vertically.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 800S-2SC is a standard duty station, momentary contact button with a 1 UP-DOWN button configuration. This standard-duty station with pushbuttons was developed and produced by Allen-Bradley. It is a product from the Series M series and is derived from the Bulletin 800S series of products. The 800S-2SC has a contact rating of 5 amperes at 600 volts AC and is enclosed in a NEMA 1 container with a rating of 1. The NEMA Type 1 general purpose stations have been developed to provide better operational flexibility and simplicity of wiring than previous generations of general-purpose stations. The whole contact mechanism for the station is contained inside the station's lid. The wiring connectors are situated at the bottom of the base. The two components are connected by contacts that are spring type and silver plated. Installation and maintenance will be streamlined as a result of this innovative design. To make them appropriate for horizontal placement, the operating buttons may be turned 90 degrees to the right. Changes like these may be performed on the fly in the field.
The surface class mounting option is required for these momentary contact buttons. This device complies with CSA, KC, and UL standards. This is a fully constructed device with a 2-hole configuration. Normally, it has a green hue to it. Push-button stations with pilot lights may be configured to function on either 120 volts or 240 volts by simply swapping out the electrical connections. It comes with a red pilot lens. One significant benefit is that all two-position Bulletin 800S standard duty selector switch stations can be converted to three-position duty selector switch stations in the field, and all three-position selector switches can be converted to two-position.
Question: Does Automation Stop offer repairs on the 800S-2SC?
Answer: Yes. We offer repairs for the 800S-2SC and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800S-2SC?
Answer: If you buy the 800S-2SC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800S-2SC online?
Answer: Yes. Automation Stop sells the 800S-2SC online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800S-2SC?
Answer: The 800S-2SC is made by Allen Bradley - Miscellaneous.
Question: What voltage does the 800S-2SC have?
Answer: The Allen Bradley - Miscellaneous 800S-2SC has a voltage of 600.
For additional information about 800S-2SC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800S-2SC.
Revision Part # | Also Known As | Availability |
---|---|---|
800S-2SC/A | 800S-2SC Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.