GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 808-K1 |
Series: | 808 |
Description:
Part number 808-K1, which was designed and manufactured by Allen Bradley / Rockwell Automation, is a low speed switch. The device style of this product is Style K. This switch is equipped with normally closed (NC) contacts. This low speed switch is capable of being mounted via a base mount. This Allen Bradley device has an enclosure rating of Type 1, 4, and 13. The operating temperature range of this product is -30 to +66 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 808-K1 is an electromechanical low speed switch. It is part of the Bulletin 808 product family. This speed switch module is designed and manufactured by Allen Bradley / Rockwell Automation. It is also categorized as a zero speed switch. The fundamental technology used to manufacture this product is electromechanical. The device style of this speed switch is Style K. It is a low speed switch that is capable of providing excellent controls. This device is equipped with one (1) normally closed (NC) contact.
Additionally, this low speed switch has a rated speed of 15 to 80 revolutions per minute (rpm), which is used to apply contact and operation adjustment. Its maximum shaft speed is rated at 1200 revolutions per minute (rpm). As far as the mounting style of this speed switch is concerned, it can be mounted through a base mount. This product supports Type 1, 4, and 13 enclosures. On the contrary, its operation does not cover zero shaft speed controls because these speed switches, which are designed for low speed controls, are not compatible with the sensing shaft speed, which are typically less than 15 revolutions per minute (rpm). Aside from that, the usage of this module must meet the standards set by the manufacturers to avoid electrostatic discharge, contact with harmful substances, and any unwanted damage that might result in poor performance of this sensing device. This device has an operating temperature that should remain within the range of -30 to +66 degrees Celsius. Additionally, this device has a storage temperature that should remain within a range of -30 to +93 degrees Celsius.
Question: Does Automation Stop offer repairs on the 808-K1?
Answer: Yes. We offer repairs for the 808-K1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 808-K1?
Answer: If you buy the 808-K1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 808-K1 online?
Answer: Yes. Automation Stop sells the 808-K1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 808-K1?
Answer: The 808-K1 is made by Allen Bradley - Miscellaneous.
For additional information about 808-K1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 808-K1.
Revision Part # | Also Known As | Availability |
---|---|---|
808-K1/A | 808-K1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.