GE / IP FANUC Series 90/30 In Stock

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

836T-D452J

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 836T-D452J
Series: 836T

Description:

Part number 836T-D452J is an Allen Bradley pressure control unit belonging to the Bulletin 836 series of products. The adjustable system difference range of this device is 5 to 40 pounds per square inch (psi), while the adjustable differential is 5 to 30 psi. The maximum line pressure of this device is 350 psi. Additionally, the maximum occasional surge pressure is rated at 375 psi. This product has an approximate shipping weight of 1.6 kilograms.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Part number 836T-D452J is a pressure control unit that was designed and manufactured by Allen Bradley / Rockwell Automation. It is part of the Bulletin 836 product line, designed for general industrial applications in pressure control and detection. Most frequently, these units are in operation with air, water, oil, noncorrosive liquids, vapors and gases for applications with air compressors, monitoring systems, liquid level control, vacuum transfer systems, and high- and low-pressure alert. The 836T-D452J model is a pressure difference control unit with operator copper allow bellows. There are two bellows, in which one bellow connected to each system. The pipeline connection is with internal thread ¼ inch, type NPTF.  The enclosure is type 1, 4, and 13 industrial uses with a standard 2-circuit contact block.

The pressure control device has an adjustable system difference range of 5 to 40 pounds per square inch (psi), and its adjustable differential is 5 to 30 pounds per square inch (psi). The device longest life and best accuracy is observed, when used in 30 to 80 percent of the setting ranges. The unit requires a minimum 30 inches of mercury line pressure vacuum and can sustain a maximum pressure of 350 pounds per square inch (psi).  The maximum occasional surge pressure of this device is 375 pounds per square inch (psi). This device has an operating temperature range of 0 to 60 degrees Celsius, or 32 to 140 degrees Fahrenheit. The relative humidity of the area surrounding the device should remain within a range of 5% and 95%, as well as be non-condensing. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 836T-D452J?

Answer: Yes. We offer repairs for the 836T-D452J and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 836T-D452J?

Answer: If you buy the 836T-D452J through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 836T-D452J online?

Answer: Yes. Automation Stop sells the 836T-D452J online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 836T-D452J?

Answer: The 836T-D452J is made by Allen Bradley - Miscellaneous.


Series information for 836T-D452J

For additional information about 836T-D452J check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 836T-D452J.

Revision Part # Also Known As Availability
836T-D452J/A 836T-D452J Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 836T-D4S2J
  • 83GT-D452J
  • 83GT-D4S2J
  • B36T-D452J
  • B36T-D4S2J
  • B3GT-D452J
  • B3GT-D4S2J

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP