GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1426-M5E |
Series: | Allen Bradley 1426 |
Description:
Part number 1426-M5E is a PowerMonitor 5000 Base Power Monitor module that was designed and manufactured by Allen-Bradley. This device operates in one (1) phase. The maximum input control power of this device is 85 to 264 volts alternating current (AC) at a frequency of 47 to 63 hertz. It monitors over 6000 parameters in every cycle, as well as four (4) voltage and four (4) current channels in every electrical cycle. The physical dimensions of this product measure 185 mm x 132 mm x 178 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1426-M5E is a PowerMonitor 5000Base Power Monitor module. It was manufactured by Allen-Bradley / Rockwell Automation. This device operates in one (1) phase, and has a maximum input control power of 85 to 264 volts alternating current (AC) at a frequency of 47 to 63 hertz. This Allen-Bradley device monitors four (4) channels of voltage, as well as four (4) channels of current, for every electrical cycle. Additionally, this device monitors over 6,000 parameters in every cycle. Furthermore, the Allen-Bradley 1426-M5E has a native Ethernet / IP connector, as well as a second connection link. This product is a basic functional 500-volt power meter with a built-in LCD display that allows an operator to conveniently record their data. Multiple communication protocols, including Modbus RTU, are supported by this power monitor. This device displays data locally. There are four (4) alarms that can be set up, but it offers selective alarms for up to twenty (20) events. This device monitors one thousand and twenty-four (1,024) data points across eight (8) channels every twelve (12) to seventeen (17) milliseconds. The reduction apparent power range is 36 kilo amperes (kA). The operating temperature range of this device is -20 to 70 degrees Celsius, or the equivalent of 4 to 158 degrees Fahrenheit. Additionally, the storage temperature range is -40 to 85 degrees Celsius, or -40 to 185 degrees Fahrenheit. The relative humidity of the area surrounding the module should remain between 5% and 95%, as well as be non-condensing. The physical dimensions of this device measure 185 mm x 132 mm x 178 mm.
Question: Does Automation Stop offer repairs on the 1426-M5E?
Answer: Yes. We offer repairs for the 1426-M5E and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1426-M5E?
Answer: If you buy the 1426-M5E through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1426-M5E online?
Answer: Yes. Automation Stop sells the 1426-M5E online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1426-M5E?
Answer: The 1426-M5E is made by Allen Bradley - Miscellaneous.
For additional information about 1426-M5E check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1426-M5E.
Revision Part # | Also Known As | Availability |
---|---|---|
1426-M5E/A | 1426-M5E Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.