GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1492-IFM20F-F24-2 |
Series: | Allen Bradley 1492 |
UPC: | 10662468497791 |
Description:
The 1492-IFM20F-F24-2 interface module has a current rating of 12 amperes and a voltage ranging from 10 to 30 volts AC/DC. The indicators circuit current is at 20 milliamperes. The control side type of connection is through plug-in, whereas for the field side, the connection type is screw connection. The recurring peak voltage at maximum value is 600 volts and should the transient voltage exceed the 600 volts, a suppression device rated 25 kilovolts must be employed.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1492-IFM20F-F24-2 is an Allen-Bradley interface module. This module has a voltage rating that ranges from 10 volts to 30 volts AC/DC. The current at maximum value for the interface module is 12 amperes, whereas the circuit maximum current is 2 amperes. The device is integrated with indicators whose circuit current is 20 milliamperes. It is necessary to ensure that the current and the voltage rating of the device is not exceeded. When this interface module is used alongside a heavy-duty relay, the use surge suppression is required. Connection of the IFM to other electrical devices is through plug in connections for the control side. The field side employs a screw type of connection. The mounting type is by DIN rail that is 35 millimeters. The peak voltage is 600 volts and is recurring. Note that, for transient voltage that is greater than 600 volts, a suppression device that is UL certified should be employed. The suppression device should be rated 25 kilovolts.
The interface module IFM should be operated at temperatures that are between 0 degrees to 60 degrees Celsius and relative humidity should be maintained between 5 percent and 95 percent that is non-condensing. The temperature code at 60 degrees Celsius is T3C. The physical dimensions of this device are approximately 34.3 mm x 29 mm x 38 mm (height x width x depth). The device is tested in the Underwriter laboratories and, therefore, certifies the Canadian and U.S product requirements. It is also CE and FM certified.
Question: Does Automation Stop offer repairs on the 1492-IFM20F-F24-2?
Answer: Yes. We offer repairs for the 1492-IFM20F-F24-2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-IFM20F-F24-2?
Answer: If you buy the 1492-IFM20F-F24-2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1492-IFM20F-F24-2 online?
Answer: Yes. Automation Stop sells the 1492-IFM20F-F24-2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1492-IFM20F-F24-2?
Answer: The 1492-IFM20F-F24-2 is made by Allen Bradley - Miscellaneous.
Question: What voltage does the Allen Bradley - Miscellaneous 1492-IFM20F-F24-2 have?
Answer: The 1492-IFM20F-F24-2 by Allen Bradley - Miscellaneous has a voltage of 24.
For additional information about 1492-IFM20F-F24-2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-IFM20F-F24-2.
Revision Part # | Also Known As | Availability |
---|---|---|
1492-IFM20F-F24-2/A | 1492-IFM20F-F24-2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.