GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1492-IFM40F |
Series: | Allen Bradley 1492 |
UPC: | 10662468170212 |
Description:
Part number 1492-IFM40F is a wiring system device that was produced by Allen-Bradley. It is a 40-pin unit, and each channel of the device has one terminal. There are no LED status indicators or fuse clips equipped to this device. Additionally, it has feed-through wiring. The maximum current per circuit is2 amperes, while the maximum current per module is 12 amperes. The dimensions of this product measure 110 mm x 83 mm x 70.6 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1492-IFM40F is a wiring system device that was manufactured by Allen-Bradley. It is part of the 1492 wiring systems, which is used for connection of CompactLogix controllers, series 5370 L1 and L2. This unit is an interface module, in which it is a combined type for input and output that can connect to analog or digital I/O, high speed PLC modules with the assistance of cables that are pre-wired and pre-tested. It is equipped with 40 cable connection pins. It does not carry LED indicators for status visualization. It does not have fuse clips. Its wiring system is of feed through type and has standard terminals, each channel having one (1) terminal of a fixed type, not being able to be removed. The unit can be used for applications in a hazardous environment Class I division 2. The maximum current per circuit is 2 amperes, while the maximum current per module is 12 amperes.
By replacing the conventional point to point wiring with ready pre-wired plug and play connection ends, the connection time will be significantly reduced. It is estimated that installation time with this technology will be approximately seventy-five (75) percent lower when compared to traditional wiring of point-to-point type. The module is installed on a DIN rail and utilizes less space than traditional terminal blocks, in some cases up to fifty (50) percent. The operating temperature of the Allen-Bradley 1492-IFM40F ranges from 0 to 60 degrees Celsius, or the equivalent range of 32 to 140 degrees Fahrenheit. The dimensions of this device measure out to 4.33 inches x 3.27 inches x 2.78 inches, or 110 mm x 83 mm x 70.6 mm.
Question: Does Automation Stop offer repairs on the 1492-IFM40F?
Answer: Yes. We offer repairs for the 1492-IFM40F and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-IFM40F?
Answer: If you buy the 1492-IFM40F through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1492-IFM40F online?
Answer: Yes. Automation Stop sells the 1492-IFM40F online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1492-IFM40F?
Answer: The 1492-IFM40F is made by Allen Bradley - Miscellaneous.
For additional information about 1492-IFM40F check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-IFM40F.
Revision Part # | Also Known As | Availability |
---|---|---|
1492-IFM40F/A | 1492-IFM40F Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.