GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1492-IFM40F-2 |
Series: | Allen Bradley 1492 |
Description:
Designed and manufactured by Allen Bradley / Rockwell Automation, this device, which has the product number 1492-IFM40F-2, is a digital interface module (IFM). This module has a fixed terminal block with a total of 40 cable connector pins. This device has a maximum feed-through voltage of 132 volts AC/DC. The voltage range of this device is from 0 to 132 volts AC/DC. It has a maximum current of 2 amperes per circuit, as well as 12 amperes per module. The physical dimensions of this IFM measure 8.27 inches x 3.27 inches x 2.78 inches.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Product number 1492-IFM40F-2 is a digital interface module, or IFM, that was designed and manufactured by Allen Bradley / Rockwell Automation. Similar to the usual terminal block, this device is capable of performing the same functions but in a more condensed way. This device has a total of forty (40) cable connector pins. This IFM lacks a light emitting diode (LED) indictor that aids with indication of system status. Unlike other IFM, this digital interface module has no fuse clips. Part number 1492-IFM40F-2 has a maximum feed-through voltage of 132 volts AC/DC. This Allen Bradley device has a voltage range of zero (0) to one hundred and thirty-two (132) volts AC/DC. The maximum current per circuit of this device is two (2) amperes. Additionally, the maximum current per module of this IFM is twelve (12) amperes. This digital interface module has physical dimensions that measure 8.27 inches x 3.27 inches x 2.78 inches (width x height x depth). When operating this digital interface module, the temperature of the surrounding environment should remain within a range of 0 degrees Celsius to 60 degrees Celsius. However, when the time comes to store this device, the temperature of the surrounding area should remain within a range of -40 degrees Celsius to 85 degrees Celsius. The humidity of the surrounding area should also be maintained. It is recommended that the relative humidity stay within levels that range from five (5) percent to ninety-five (95) percent. The humidity should also be non-condensing as to not damage this digital interface module in any way.
Question: Does Automation Stop offer repairs on the 1492-IFM40F-2?
Answer: Yes. We offer repairs for the 1492-IFM40F-2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-IFM40F-2?
Answer: If you buy the 1492-IFM40F-2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1492-IFM40F-2 online?
Answer: Yes. Automation Stop sells the 1492-IFM40F-2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1492-IFM40F-2?
Answer: The 1492-IFM40F-2 is made by Allen Bradley - Miscellaneous.
For additional information about 1492-IFM40F-2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-IFM40F-2.
Revision Part # | Also Known As | Availability |
---|---|---|
1492-IFM40F-2/A | 1492-IFM40F-2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.