GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1492-IFM40F-FS24-2 |
Series: | Allen Bradley 1492 |
UPC: | 10662072713997 |
Description:
Belonging to the Bulletin 1492 series of products, part number 1492-IFM40F-FS24-2 is a digital interface module. This module is a 40-pin isolated IFM that is fusible. This module has a voltage range of 10 to 30 volts AC/DC. The maximum current per point of this device is 2 amperes, while the maximum current per module is 12 amperes. The nominal indicator circuit current is rated at 2 milliamperes. It has physical dimensions that measure 4.72 inches x 3.27 inches x 2.78 inches.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1492-IFM40F-FS24-2 is a digital interface module (IFM). It is a 40 pin isolated fusible IFM module. This model is part of the Bulletin 1492 series of products. There are five (5) fuse clips used with this IFM that have a size measuring twenty (20) millimeters. However, this module does not come with these fuse clips. This module is compact and easy to manage. This device has an LED and fuse voltage range rated at 24 volts AC/DC. It is important to note that this voltage rating is used for the fuse indicators, also known as the LED feature, which is used for displaying the status of the operation. Therefore, operators can make notes in real-time for advanced level control over productivity. Aside from that, similar to other interface modules, the 1492-IFM40F-FS24-2 incorporates two (2) field-side terminals per I/O connection.
The Allen Bradley 1492-IFM40F-FS24-2 digital interface terminal has a rated voltage range of 10 to 30 volts AC/DC. It has a maximum current rated at 2 amperes per circuit, as well as a maximum current rated at 12 amperes per module. The nominal indicator circuit current of this digital interface module is rated at 2 milliamperes. This device has physical dimensions that measure 4.72 inches x 3.27 inches x 2.78 inches (width x height x depth). This module has an operating temperature that should range from 0 degrees Celsius to 60 degrees Celsius. Additionally, the 1492-IFM40F-FS24-2 digital interface module should be stored in an area where the temperature ranges from -40 degrees Celsius to +85 degrees Celsius.
Question: Does Automation Stop offer repairs on the 1492-IFM40F-FS24-2?
Answer: Yes. We offer repairs for the 1492-IFM40F-FS24-2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-IFM40F-FS24-2?
Answer: If you buy the 1492-IFM40F-FS24-2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1492-IFM40F-FS24-2 online?
Answer: Yes. Automation Stop sells the 1492-IFM40F-FS24-2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1492-IFM40F-FS24-2?
Answer: The 1492-IFM40F-FS24-2 is made by Allen Bradley - Miscellaneous.
For additional information about 1492-IFM40F-FS24-2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-IFM40F-FS24-2.
Revision Part # | Also Known As | Availability |
---|---|---|
1492-IFM40F-FS24-2/A | 1492-IFM40F-FS24-2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.