GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1492-SPM2C100 |
Series: | Allen Bradley 1492 |
Description:
The 1492-SPM2C100 is a compact motor protector / miniature circuit breaker. It has a rated voltage range of 400 Volts at the frequency range of 50 to 60 Hz. The current rating of this model is 10 amperes, and it is also housed with the IP20 rated enclosure. This device is powered via a power supply capable of producing a voltage range of 277 to 480 volts AC. This product has a MCB circuit breaker type.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1492-SPM2C100 is a mini circuit breaker. This product is classified as protective gear that is commonly used to enhance the safety of the machine units in the automation industry. This machine unit is part of the Bulletin 1492 series of products. This device was designed and manufactured by Allen Bradley / Rockwell Automation.
It contains two (2) power poles used for the configuration. Additionally, it can draw a current rating of ten (10) amperes. In addition, its tripping adjustment is a type C. This small circuit breaker can operate on 277 volts to 480 volts that is supplied via an alternating current (AC) power supply. This device has a breaking capacity rated at 10 kilo-amperes at a maximum voltage rating of approximately 480 volts. Its DC (direct current) voltage range is 96 volts. Aside from that, its circuit breaker type is MCB. Additional product specifications include a 35-millimeter sensor length, a 75-millimeter sensor width, and a DIN style mounting mechanism.
Moreover, the break time of this unit is instantaneous, and it contains screws for terminal contacts. The module can be used for general purpose applications since it has thermal and magnetic tripping mechanisms. Apart from that, it can also use toggle switching for resting the actuators. This circuit breaker offers compact design architecture suitable for industrial applications, and it belongs to the trusted brand for a manufacturer. However, its safety directives and configuration manuals should meet the standards set by the manufacturer and the industry for avoiding any damage to the product.
Question: Does Automation Stop offer repairs on the 1492-SPM2C100?
Answer: Yes. We offer repairs for the 1492-SPM2C100 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-SPM2C100?
Answer: If you buy the 1492-SPM2C100 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1492-SPM2C100 online?
Answer: Yes. Automation Stop sells the 1492-SPM2C100 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1492-SPM2C100?
Answer: The 1492-SPM2C100 is made by Allen Bradley - Miscellaneous.
For additional information about 1492-SPM2C100 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-SPM2C100.
Revision Part # | Also Known As | Availability |
---|---|---|
1492-SPM2C100/A | 1492-SPM2C100 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.