GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1606-XL120D |
Series: | Allen Bradley 1606 |
UPC: | 10662073043932 |
Description:
Allen-Bradley's 1606-XL120D is a standard single-phase AC to DC power supply unit. This power supply module is designed to operate at an input voltage range of 100 to 120 volts for a rated input current of below 2.6 Amps and 200 to 240 volts AC producing a corresponding rated input current below 1.4 Amps. In addition, it is equipped to receive input DC voltages between 210 and 375 volts that can be manually selected. Additionally, the DC output voltage is rated at 24 volts producing a functional output current of 5 Amps +5%/-1% and 120 watts of power.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part Number 1606-XL120D, produced by Allen-Bradley, is a standard single-phase AC/DC power supply unit with a wide range of input voltage options and reliable output DC voltage value capable of boosting power up by 20% up to 6 Amps. By switching the input voltage to the 230 volts position, the power supply unit operates at low and moderate loads up until 3 A for input voltages between 95 and 264 volts AC. For continuous loading, an AC input voltage between 176 and 264 volts AC produces a corresponding output current of 5 to 6 Amps, while input voltages between 95 and 117 volts AC would give output currents of 3 Amps. Similarly, this device produces a wide range of output current between 2 and 6 Amps for a range of DC input voltages ranging from 100 – 150 volts DC and 210 – 375 volts DC. The manual switch should be left at the 230-volt position for DC input. At the 115 volts AC switch point, input AC voltages between 85 and 132 volts produce 5 to 6 Amps of output current. Additionally, the input current at the 230 volts switch position operates at less than 1.4 amps while the input current at the 115 volts AC input voltage switch point is less than 2.6 Amps. Designed to have a high inrush current of 15 Amps, this device has its output protected against short circuit, overload, and open circuit with overvoltage protection of 29 volts. The primary side of the power supply can be protected with a fuse or circuit breaker, and its design incorporates robust mechanics enabling easy access to all connection blocks.
Question: Does Automation Stop offer repairs on the 1606-XL120D?
Answer: Yes. We offer repairs for the 1606-XL120D and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1606-XL120D?
Answer: If you buy the 1606-XL120D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1606-XL120D online?
Answer: Yes. Automation Stop sells the 1606-XL120D online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1606-XL120D?
Answer: The 1606-XL120D is made by Allen Bradley - Miscellaneous.
Question: What can I expect the voltage included with the 1606-XL120D to be?
Answer: The Allen Bradley - Miscellaneous 1606-XL120D has a voltage of 24.
For additional information about 1606-XL120D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1606-XL120D.
Revision Part # | Also Known As | Availability |
---|---|---|
1606-XL120D/A | 1606-XL120D Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.