GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1606-XLDNET4 |
Series: | Allen Bradley 1606 |
UPC: | 10662073043925 |
Description:
Part number 1606-XLDNET4 is a DeviceNet power supply module. This module was designed and manufactured by Allen Bradley / Rockwell Automation. This is a one (1)-phase module with an output voltage rating of 24 volts DC and an output power rating of 120 watts. This module has an efficiency rating of 90 percent. The input voltage ranges for this device are 100 to 120 volts AC and 200 to 240 volts AC, as well as 210 to 375 volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 1606-XLDNET4 is a Bulletin 1606 special module power supply. The 1-phase power supply is characterized at an output voltage of 24 V DC, an output current of 4 A (Electronically Limited), and output power of 120 W. The DeviceNet switch mode power supply has an input voltage specified at 100 to 120 V AC and 200 to 240 V AC with manual selection and 210 to 375 V DC and rated input current of less than 2.6 amperes and less than 1.4 amperes. This power supply has an operational range of 85 to 132 and 176 to 264 V AC, as well as a hold up time of 37 milliseconds minimum at 196 V AC. This device has a typical operating efficiency of 90%. The power supply module comes with DIN rail mounting capability and has bolt on connections at both its input and outputs. It supports conductor sizes of #20 to #10 AWG (0.5 to 4 mm²) for stranded and #20 to #10 AWG (0.5 to 6 mm²) for solid type cables.
Additional benefits and features of the 1606-XLDNET4 power supply include a wide-range input, no switch-off at overload, robust mechanics, and EMC and world-wide approvals for industry. It operates adequately within a temperature range of -10 to +70°C and above +60°C with de-rating. The power supply is CE marked, cULus and cURus listed and complies with safety standards and EMC standards. This device has a mean time between failures, or MTBF, rated at 520,000 hours.
Region of Manufacture* | Czech Republic |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 1606-XLDNET4?
Answer: Yes. We offer repairs for the 1606-XLDNET4 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1606-XLDNET4?
Answer: If you buy the 1606-XLDNET4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1606-XLDNET4 online?
Answer: Yes. Automation Stop sells the 1606-XLDNET4 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1606-XLDNET4?
Answer: The 1606-XLDNET4 is made by Allen Bradley - Miscellaneous.
Question: What Region of Manufacture* is included with the Allen Bradley 1606-XLDNET4?
Answer: The Allen Bradley 1606-XLDNET4 has a Czech Republic Region of Manufacture*.
For additional information about 1606-XLDNET4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1606-XLDNET4.
Revision Part # | Also Known As | Availability |
---|---|---|
1606-XLDNET4/A | 1606-XLDNET4 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.