GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1606-XLS480F |
Series: | Allen Bradley 1606 |
Description:
1606-XLS480F is an ultra-small size power supply featuring DC/ AC single-phase input by Rockwell Automation. For AC input type, it needs 100-240 volts AC at 50-60Hz and an AC input current of 4.59/ 2.48 amperes at 120 / 230 VAC. For DC input type, it needs 110-300 volts DC and a DC input current of 4.7/ 1.7 amperes at 110 / 300 VDC. It outputs a DC nominal value of 48 volts as output with an adjustable range of 48 to 55 volts. At 48 volts, it can supply 10 amperes current continuously and 15 amperes up to 4 seconds.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Automation power supply 1606-XLS480F is a highly efficient product. It has an extremely small size. It uses synchronous rectification and unique design to achieve performance and design optimization. It offers features like power boost, hiccup mode, and circuitry to limit active inrush current.
It can provide 48 volts on output terminals. But, this output value ranges from 48 to 59 volts. It has a rated output power of 480 watts. It provides 10 amperes at 48 volts output and 8.7 amperes at 55 volts output. It can be driven with both alternating current (AC) and direct current (DC). For AC-input, the voltage levels must be between 85-276 volts for continuous operation, 60-85 volts for 200 milliseconds (full power), and 276-300 volts for less than 500 milliseconds; nominal AC input is 100 - 240 volts. The AC input frequency should be in the range of 50 to 60 Hz, allowed tolerance is ±6%. At the input of 100 VAC, it features 5.47 amperes input current, 0.96 power factor, 1.6 crest factor, 640 milliseconds start-up delay and 80 milliseconds rise time. At the input of 120 VAC, it features 4.56 amperes input current, 0.95 power factor, 1.7 crest factor, 610 milliseconds start-up delay and 80 milliseconds rise time. At the input of 230 VAC, it features 2.48 amperes input current, 0.90 power factor, 2.05 crest factor, 660 milliseconds start-up delay and 80 milliseconds rise time.
For DC-input, the nominal voltage is 110 - 300 volts. The allowed range is 88-375 Volts DC for continuous operation. It extracts 4.7 amperes at 110 VDC and 1.7 amperes at 300 VDC from the DC source.
Question: Does Automation Stop offer repairs on the 1606-XLS480F?
Answer: Yes. We offer repairs for the 1606-XLS480F and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1606-XLS480F?
Answer: If you buy the 1606-XLS480F through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1606-XLS480F online?
Answer: Yes. Automation Stop sells the 1606-XLS480F online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1606-XLS480F?
Answer: The 1606-XLS480F is made by Allen Bradley - Miscellaneous.
For additional information about 1606-XLS480F check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1606-XLS480F.
Revision Part # | Also Known As | Availability |
---|---|---|
1606-XLS480F/A | 1606-XLS480F Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.