GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1606-XLSRED40 |
Series: | Allen Bradley 1606 |
Description:
The Allen Bradley 1606-XLSRED40 is a power supply redundancy module that belongs to the Bulletin 1606 series of products. The primary purpose of this device is to provide high current redundancy to the power supply module. This device has an input voltage of 24 to 28 volts DC, with an input voltage range of 16.8 to 36.4 volts DC. The output current of this device is rated at 40 amperes. This device has an operating temperature range of -40 to +70 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1606-XLSRED40 belongs to the Bulletin1606 series of performance power supply redundancy modules. This dual input module utilizes Mosfet decoupling technology. This device has a voltage drop-in/output of 72 millivolts, a no-load power loss of 0.7 watts, a nominal load power loss of 2.5 watts, and a mean time before failure (MTBF) of 2.7 million hours. This device has a nominal current per input of 20 amperes across the dual inputs with 50 percent of the higher currents allowed for up to 55 seconds. Also, the nominal load loss has a 1 + 1 redundancy, as well as symmetrical input currents. This device's mean time before failure value is dependent on the temperature that it is being subjected to. Additionally, the rated output derating of this module is 0 amperes per degree Celsius (0A/°C). Moreover, this device has a minimum expected lifetime of 246 thousand hours. The operating temperature for this device should remain within a range of -40 degrees Celsius to +70 degrees Celsius. The storage temperature, however, should remain within a range of -40 degrees Celsius to +85 degrees Celsius.
The 1606-XLSRED40 was designed and manufactured by Allen Bradley / Rockwell Automation, in which it was designed to provide high current redundancy to the power supply module. This Mosfet redundancy device has a peak input current per input of 1000 amperes for 1 millisecond and a reverse current value per input of 1 milliampere. Also, its Mosfet decoupling element has an input to output voltage drop of 140 millivolts. However, this device has no low input voltage alarm contacts. The physical dimensions of this device measure 36 mm x 124 mm x 127 mm, with an approximate weight of 340 grams.
Question: Does Automation Stop offer repairs on the 1606-XLSRED40?
Answer: Yes. We offer repairs for the 1606-XLSRED40 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1606-XLSRED40?
Answer: If you buy the 1606-XLSRED40 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1606-XLSRED40 online?
Answer: Yes. Automation Stop sells the 1606-XLSRED40 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1606-XLSRED40?
Answer: The 1606-XLSRED40 is made by Allen Bradley - Miscellaneous.
For additional information about 1606-XLSRED40 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1606-XLSRED40.
Revision Part # | Also Known As | Availability |
---|---|---|
1606-XLSRED40/A | 1606-XLSRED40 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.