GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700-HNC44AA12 |
Series: | Allen Bradley 700 |
Description:
The Allen Bradley 700-HNC44AA12 is a relay module for timing. It offers four functions as On-delay, One shot, Repeat cycle off-start, Repeat cycle on-start, and a 4PDT contact output. It has a timing range from 0 seconds to 1 hour. This relay timing module can provide socket mounting. Its width is 63 millimeters, height 67 mm, and width 30 mm. This 110VAC 4 pole timer belongs to the 400-HNC product range.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 700-HNC44AA12 is a Relay Timing 2 module. This relay module is compatible with 700HN103 or 700HN128. It has four operating modes, namely on-delay, one shot, repeat cycle off-start, repeat cycle on-start, and can convert Bulletin 700 HC Ice cube relays into timed relays. It also has a 4PDT contact output and a timing range of 0.1 seconds to 10 hours, as well as being suited for socket mounting. In addition, it has 63 mm depth while its height is 67 mm. The width of this relay module is 30 mm. The timing range of this product is 0.1 to 600 seconds. Its control supply voltage rating is 100 to 120 Volts at AC 50 Hz to 60 Hz. It supports AC voltage for actuation. This module is suitable for the DIN rail mounting with the top hat rail. This module offers a delay on the energization function, so when the trigger is applied, the output is energized. It has no outputs such as delayed, change-over contact, normally closed (N.C.) contact, normally open (N.O.) contact, and undelayed. Its pilot rating is NEMA B300, and its pin type is the plugin. Furthermore, its appropriate operating temperature rating set by the manufacturer is -10 °C to 50 °C (with no icing) while its storage temperature rating is -25 °C to 65 °C (with no icing). It is important to maintain this module at the right temperature ranges to ensure its safety, and operators should also keep this module from contaminants.
Question: Does Automation Stop offer repairs on the 700-HNC44AA12?
Answer: Yes. We offer repairs for the 700-HNC44AA12 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700-HNC44AA12?
Answer: If you buy the 700-HNC44AA12 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700-HNC44AA12 online?
Answer: Yes. Automation Stop sells the 700-HNC44AA12 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700-HNC44AA12?
Answer: The 700-HNC44AA12 is made by Allen Bradley - Miscellaneous.
For additional information about 700-HNC44AA12 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700-HNC44AA12.
Revision Part # | Also Known As | Availability |
---|---|---|
700-HNC44AA12/A | 700-HNC44AA12 Ser A, Series A, Rev A | Request a Quote |
700-HNC44AA12/B | 700-HNC44AA12 Ser B, Series B, Rev B | Request a Quote |
700-HNC44AA12/C | 700-HNC44AA12 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.