GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700-NM400A1 |
Series: | Allen Bradley 700 |
Description:
The Allen Bradley 700-NM400A1 is an alternating current latch relay. It is part of the Bulletin 700 series of products from Allen Bradley. This industrial relay is suitable for both regular and concentrated industrial tasks. The enclosure rating for this relay is NEMA A300/P300. this device has a continuous current rating of 10 amperes, as well as a voltage rating of 110/120 volts AC. This device has an approximate weight of 1.70 pounds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 700-NM400A1 is an industrial relay. The 700-NM400A1 is part of Allen Bradley's Essential Component line of industrial products. Just like any other current latch relay, the Allen Bradley 700-NM400A1 helps with increasing uptime and decreasing maintenance downtime. This device must be supplied with a continuous current supply of 10 amperes. Its voltage rating is 110/120 volts alternating current (AC). The rated frequency on this alternating current latch relay is 50/60 hertz. This latch relay is a portable and lightweight module. The approximate shipping dimensions for this current latch relay is 4.00 inches x 3.50 inches x 2.25 inches. The weight of this latch relay is 1.70 pounds.
The Allen Bradley 700-NM400A1 is a highly reliable industrial switching solution. This device belongs to the Bulletin 700-N series of products from Allen Bradley. The 700-NM400A1 comes with low-profile, yet advanced, manual override capabilities. One important part of this current latch relay is the red bar which houses the LED indicators. When the LED indicator is turned on, it indicates that the latch relay is operating at its regular levels. However, if the latch encounters any interruption, the LED light will go off. For faster operation, the Allen Bradley 700-NM400A1 comes with logic reed contacts, as well as other important features. It is available in two different variations with either 4 or 8 poles. The 700-NM400A1 alternating current latch relay has overlapping contacts. For advanced measurements, the Allen Bradley 700-NM400A1 comes with a pneumatic timing unit, as well as a solid-state timing unit.
Question: Does Automation Stop offer repairs on the 700-NM400A1?
Answer: Yes. We offer repairs for the 700-NM400A1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700-NM400A1?
Answer: If you buy the 700-NM400A1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700-NM400A1 online?
Answer: Yes. Automation Stop sells the 700-NM400A1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700-NM400A1?
Answer: The 700-NM400A1 is made by Allen Bradley - Miscellaneous.
Question: What voltage does the Allen Bradley - Miscellaneous 700-NM400A1 have?
Answer: The Allen Bradley - Miscellaneous 700-NM400A1 has a voltage of 110.
For additional information about 700-NM400A1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700-NM400A1.
Revision Part # | Also Known As | Availability |
---|---|---|
700-NM400A1/A | 700-NM400A1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.