GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-J20 |
Series: | Allen Bradley 800T |
Description:
The 800T-J20 is a selector switch device from the 800T series by Allen-Bradley. It has a voltage range of 600 VAC and contains NEMA 4/13 enclosure as well as UL and CE certification. This module has three positions and a size of 0 mm. The 800T-J20 has a knob lever for an actuator, a 30.5 mm hole, and is a nonilluminated switch selector. Additionally, this device's compatible cable size is 18 to 14 AWG.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 800T-J20 is a selector switch. Allen-Bradley/Rockwell Automation manufactures this unit. It is a three position, non illuminated selector switch device. In addition, it is from the 800T Bulletin. Its dielectric strength is rated at 2200 V for 1 minute and 1300 V for 1 minute logic reed. For the target tab selections, this selector switch includes cam and contact blocks. This product does not contain finger safeguard functionality, but it has a terminal guard and also has a knob lever on its head. It has NEMA 4/13 protective enclosure. Its Mtg hole size is 30.5 mm while its voltage rating is 600 VAC. In addition, this non illuminated standard knob operator has a maximum operating temperature of 55 degrees Celsius (131 degrees Fahrenheit). Its minimum operating temperature is -40 degrees Celsius (-40 degrees Fahrenheit). It is compliant with CSA/UL certifications/standards. The 800T Bulletin modules have a vibration rating of 10 to 2000 Hz, 0.06 in. (1.52 mm). This module has a -40 to +185 °F (-40 to +85 °C) storage temperature rating with a humidity range of 50 to 95%. The 800T-J20 has a shock range of 100g. Aside from these characteristics, this knob operator offers mechanical ingenuity and is quite durable in terms of performance. To ensure enhanced safety, the operators should always wear protective gear when configuring these units. Similarly, this unit should not come into contact with contaminants such as toxic gases, liquids, and other such particles, as well as maintaining the appropriate minimum and maximum storage and operating temperatures and humidity ranges.
Question: Does Automation Stop offer repairs on the 800T-J20?
Answer: Yes. We offer repairs for the 800T-J20 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-J20?
Answer: If you buy the 800T-J20 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-J20 online?
Answer: Yes. Automation Stop sells the 800T-J20 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-J20?
Answer: The 800T-J20 is made by Allen Bradley - Miscellaneous.
For additional information about 800T-J20 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-J20.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-J20/A | 800T-J20 Ser A, Series A, Rev A | Request a Quote |
800T-J20/B | 800T-J20 Ser B, Series B, Rev B | Request a Quote |
800T-J20/C | 800T-J20 Ser C, Series C, Rev C | Request a Quote |
800T-J20/D | 800T-J20 Ser D, Series D, Rev D | Request a Quote |
800T-J20/E | 800T-J20 Ser E, Series E, Rev E | Request a Quote |
800T-J20/F | 800T-J20 Ser F, Series F, Rev F | Request a Quote |
800T-J20/G | 800T-J20 Ser G, Series G, Rev G | Request a Quote |
800T-J20/H | 800T-J20 Ser H, Series H, Rev H | Request a Quote |
800T-J20/I | 800T-J20 Ser I, Series I, Rev I | Request a Quote |
800T-J20/J | 800T-J20 Ser J, Series J, Rev J | Request a Quote |
800T-J20/K | 800T-J20 Ser K, Series K, Rev K | Request a Quote |
800T-J20/L | 800T-J20 Ser L, Series L, Rev L | Request a Quote |
800T-J20/M | 800T-J20 Ser M, Series M, Rev M | Request a Quote |
800T-J20/N | 800T-J20 Ser N, Series N, Rev N | Request a Quote |
800T-J20/O | 800T-J20 Ser O, Series O, Rev O | Request a Quote |
800T-J20/P | 800T-J20 Ser P, Series P, Rev P | Request a Quote |
800T-J20/Q | 800T-J20 Ser Q, Series Q, Rev Q | Request a Quote |
800T-J20/R | 800T-J20 Ser R, Series R, Rev R | Request a Quote |
800T-J20/S | 800T-J20 Ser S, Series S, Rev S | Request a Quote |
800T-J20/T | 800T-J20 Ser T, Series T, Rev T | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.