GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | N-2304-1-F00AA |
Series: | N Series |
Description:
The Allen-Bradley N-2304-1-F00AA is a brushless servo motor with a feedback encoder that provides feedback for every 1000-line count. This servo motor belongs to the N series of brushless servo motors and is supplied by a 115-volt alternating current (AC) voltage supply. An operating speed of 6000 revolutions per minute (rpm) is exhibited by this motor. Additionally, it has a maximum torque capability of 0.23 Newton meters. This motor is not equipped with a brake.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part Number N-2304-1-F00AA is an N series brushless servo motors that has a rough industrial construction. The N-2304-1-F00AA servo motor was designed and manufactured by Allen-Bradley / Rockwell Automation, and it was manufactured with a NEMA frame style. Additionally, this device comes in four (4) different NEMA frame sizes. This motor has replaced the previous older systems due to its compatibility to interface with pulleys and gearboxes. To determine the motor's current position, this servo motor has a specific feedback optical encoder of designation N-2300 Standard. This servo motor must be used with a shaft seal. This shaft seal is made up of 416 stainless steel material and comes with lubricant, thus preventing any kind of contamination due to foreign or processed material and reducing the wear. This motor has a frame size of twenty-three (23) and four (4) magnetic poles containing motor winding.
The Allen-Bradley N-2304-1-F00AA motor has numerous technical specifications that include a rated speed of 6000 revolutions per minute (rpm), a motor winding voltage rating of 115 volts alternating current (AC), a rotor moment of inertia rated at 0.00002 kg-m², a continuous torque capability range of 0.18 to 5.9 Newton meter, a damping rating of 0.0021 Nm/krpm, the thermostat voltage supply range of 0 to 250 volts direct current (DC), a friction torque rating of 0.014 Newton meters, and an operational range of 0 degrees Celsius to 40 degrees Celsius. The estimated weight of this device is 8 pounds and the dimensions of shaft seal measure 0.875 x 0.250 x 0.125 inches.
Type | AC Servo Motor |
Question: Does Automation Stop offer repairs on the N-2304-1-F00AA?
Answer: Yes. We offer repairs for the N-2304-1-F00AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and N-2304-1-F00AA?
Answer: If you buy the N-2304-1-F00AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the N-2304-1-F00AA online?
Answer: Yes. Automation Stop sells the N-2304-1-F00AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the N-2304-1-F00AA?
Answer: The N-2304-1-F00AA is made by Allen Bradley - Miscellaneous.
Question: What type of product is the N-2304-1-F00AA?
Answer: The N-2304-1-F00AA is part of the N Series series.
For additional information about N-2304-1-F00AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding N-2304-1-F00AA.
Revision Part # | Also Known As | Availability |
---|---|---|
N-2304-1-F00AA/A | N-2304-1-F00AA Ser A, Series A, Rev A | Request a Quote |
N-2304-1-F00AA/B | N-2304-1-F00AA Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.