GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 40786-802-02 |
Series: | misc |
Description:
Allen-Bradley designed and manufactured the 40786-802-02 Auxiliary Adapter. This adapter is designed for use with a contractor or a starter. Usually, this Auxiliary Contact Adaptor is IEC approved and may be used with a contactor rated at 600 amperes. This Auxiliary Adapter is equipped with an Ethernet/IP female M12 connection, network address switched, and a tiny style pin located in the male auxiliary power connector. Additionally, this device is capable of being recycled.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's 40786-802-02 auxiliary adapter is designed to be used with a contactor or starter rated at 600 amperes. This module is recyclable, which means it has a minimal environmental effect, which is one of the important features and benefits. Furthermore, the 40786-802-02 auxiliary adapter has quick and simple snap-on technology that eliminates the need for any tools during installation. Different contact configurations are included in this kit so you may choose the setup that best meets your requirements. As a rule of thumb, this sort of adapter may provide incredibly rapid switching times for increased productivity.
Before beginning to utilize any auxiliary adapter, such as the 40786-802-02 Auxiliary Adapter, users should be aware of the following key concerns. Before you can create any I/O connections with the ArmorPOINT I/O adapters, you must first configure the chassis size of the adapters. The chassis size is initially set to one (1) slot, which reflects the adapter on its own. This is the factory default option. You must set the chassis size to a value that equals one (1) slot for the adapter plus one (1) slot for every I/O point that is present in the adapter's backplane. After being switched on, the adapter determines the number of I/O modules that are present on its backplane against the value saved in non-volatile type memory to determine the chassis size of the adapter. There will be no I/O connections allowed until the total number of I/O modules present matches the chassis size value minus one for the adapter itself.
Question: Does Automation Stop offer repairs on the 40786-802-02?
Answer: Yes. We offer repairs for the 40786-802-02 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 40786-802-02?
Answer: If you buy the 40786-802-02 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 40786-802-02 online?
Answer: Yes. Automation Stop sells the 40786-802-02 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 40786-802-02?
Answer: The 40786-802-02 is made by Allen Bradley - Miscellaneous.
For additional information about 40786-802-02 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 40786-802-02.
Revision Part # | Also Known As | Availability |
---|---|---|
40786-802-02/A | 40786-802-02 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.