GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 709-COD |
Series: | misc |
Description:
Part number 709-COD is a Bulletin 709 series non-reversing motor starter that was designed and manufactured by Allen-Bradley. This device has a NEMA size 2 enclosure and operates in 2 phases. Additionally, this device is equipped with 3 poles, as well as a 120 volts AC coil. The rated power consumption of this terminal is 25 horsepower (Hp). this Allen-Bradley device is equipped with screw-type electrical contacts. The physical dimensions of this starter measure 177.8 mm x 127 mm x 101.6 mm. The approximate weight of this device is 3 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 709-COD, manufactured by Allen Bradley, is a Bulletin 709 series NEMA 2, 2-phase, 3-pole non-reversing motor starter contactor. The starter is compact and weighs approximately 3 kilograms (6.61 pounds). It has approximate physical dimensions of 7.00 inches x 5.00 inches x 4 inches (177.8 mm x 127 mm x 101.6 mm) and can be used with a variety of machine tools and motors. The Bulletin 709 full voltage starter with dual overloads has a 120 volts AC coil. The 709-COD starter can has a maximum power rating of 25 horsepower (Hp). The 709-COD starter is equipped with screw type electrical contacts and can be mounted in the upright position. Its enclosure offers protection from the outside environment and is meant to be used in indoor settings.
The 709-COD motor starter is designed for full voltage starting of poly phase squirrel cage motors and control of slip ring motors. It can also be utilized in self-starting single phase motors. The rapid and consistent action of the 709-COD starter makes it ideal for controlling high speed automated machine tools. The compactness of the starter makes it suitable to be used with a wide range of machines and be fitted in limited areas on control panels. Additional features of the 709-COD starter include a high efficiency magnet, long-life contact structures, handy and convenient to use terminals, pressure molded coil, permanent air gap, enclosed arc chamber, and reliable overload relays. The low drop-out voltage of the 709-COD starter allows it to operate very well for refrigeration and air conditioning applications.
Question: Does Automation Stop offer repairs on the 709-COD?
Answer: Yes. We offer repairs for the 709-COD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 709-COD?
Answer: If you buy the 709-COD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 709-COD online?
Answer: Yes. Automation Stop sells the 709-COD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 709-COD?
Answer: The 709-COD is made by Allen Bradley - Miscellaneous.
For additional information about 709-COD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 709-COD.
Revision Part # | Also Known As | Availability |
---|---|---|
709-COD/A | 709-COD Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.