GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | W61 |
Series: | misc |
Description:
The Allen Bradley W61 is a W series overload thermal heater element. The trip class 20 heater element has a full load current rating of 22.2 amperes, 22.9 amperes, 23.2 amperes, and 25.1 amperes at sizes 0, 1, 2, and 3, respectively. The W series resistive heater operates using a eutectic alloy overload relay. This device has physical dimensions that measure 101.6 mm x 101.6 mm x 25.4 mm. This device also has an approximate weight of 0.07 kilograms, or 0.14 pounds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number W61 by Allen Bradley is a W series thermal overload heater element. The W series heater element is rated for a full load current of 22.2 amperes at size 0, 22.9 amperes at size 1, 23.2 amperes at size 2, and 25.1 amperes at size 3. Its current rating is defined as 115% of its full load amperes. The heater element is classified as a trip class 20 protection device. The heater element has a manual reset option.
The resistive heater element operates via a eutectic alloy overload relay. The W61 heater element is suitable for use with thermal overload relays, motor controls, and magnetic motor starters. It is designed to be used in conjunction with Allen Bradley Bulletin 100, 500, 609, and 1200 line starters. The heater element provides added protection and is designed for use in relay applications requiring Class 20 protection. The heater element has screw-on type electrical connections with a torque rating of 26 lb-in, or 2.9 Nm. It has top mounting capability and can be fixed on top of desired relay application.
It is certified according to KC standards. This heater element can be adequately used at an ambient temperature of up to 40 ºC, or 104 ºF. This heater element has a service factor greater than or equal to 1.15. It has an estimated shipping weight of 0.07 kilograms, or the equivalent of 0.14 pounds. The W61 heater element is compact with a space saving design and has dimensions that measure 101.6 millimeters x 101.6 millimeters x 25.4 mm (4 inches x 4 inches x 1 inches).
Question: Does Automation Stop offer repairs on the W61?
Answer: Yes. We offer repairs for the W61 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and W61?
Answer: If you buy the W61 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the W61 online?
Answer: Yes. Automation Stop sells the W61 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the W61?
Answer: The W61 is made by Allen Bradley - Miscellaneous.
For additional information about W61 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding W61.
Revision Part # | Also Known As | Availability |
---|---|---|
W61/A | W61 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.