GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | MVI56-PDPMV1 |
Series: | ControlLogix |
UPC: | 886739898268 |
Description:
The MV156-PDPMV1 is a communication module from Allen-Bradley. It belongs to the Profibus DP-V1 line of modules. ControlLogix processors may interact with slave devices that implement the Profibus DP-V1 and DP-V0 protocols. The interaction happens using the MVI56 Profibus DP-V1 master network interface module. The module serves as an I/O module between the processor and Profibus network, and according to the IEC 61158, it supports all the Master requirements. This device takes up one (1) 1756 ControlLogix chassis slot.
This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MVI56-PDPMV1 module is compatible with the ControlLogix platform. The Profibus DP-V1 module for ControlLogix platform processors is a strong communication interface from Allen-Bradley. The module, which was created under license from Rockwell Automation, uses proprietary backplane technology to allow for robust data interchange with ControlLogix processors. The module complies with the IEC 61158 Master requirements in its entirety. By implementing the class 2 or class 1 DP-V1 services of Profibus DP-V1 and DP-v0 protocol, the processor can interact with the slave devices through which we can transfer the parameter data fast, and securely.
Between the ControlLogix CPU and the PROFIBUS Network, the module function as an independent I/O module. The Input/Output data transfer on PROFIBUS is asynchronous to Data transfer from the processor. PROFIBUS connection options, including wired and wireless stand-alone gateways, are available from ProSoft Technology for all Rockwell Automation systems. The Profibus DP communication module from ProSoft Technology supports CIPconnect. This module offers extended diagnostic data and may be set with up to 1536 bytes of output and 1536 cyclic bytes of data.
The MVI56-PDPMV1 features built-in LED status indicators. The LEDs show the module's current condition of operation and its status. Run, Ready, Token, and Error are some of the LED indications on this controller. A 1756 ControlLogix chassis is equipped with the MVI56-PDPMV1 Profibus connection module. It takes up a single chassis slot and draws three (3) milliamperes at twenty-four (24) volts DC (direct current) and eight hundred (800) milliamperes at five (5) volts DC from the backplane.
Question: Does Automation Stop offer repairs on the MVI56-PDPMV1?
Answer: Yes. We offer repairs for the MVI56-PDPMV1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and MVI56-PDPMV1?
Answer: If you buy the MVI56-PDPMV1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MVI56-PDPMV1 online?
Answer: Yes. Automation Stop sells the MVI56-PDPMV1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MVI56-PDPMV1?
Answer: The MVI56-PDPMV1 is made by Allen Bradley - Miscellaneous.
Question: What type of product is the MVI56-PDPMV1?
Answer: The MVI56-PDPMV1 is part of the ControlLogix series.
For additional information about MVI56-PDPMV1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MVI56-PDPMV1.
Revision Part # | Also Known As | Availability |
---|---|---|
MVI56-PDPMV1/A | MVI56-PDPMV1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.