GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | SST-DHP-PCI |
Series: | SST |
Description:
This SST-DHP-PCI interface card is suitable for communication with Data Highway Plus (DH+) networks. It is a completely compliant 33 MHz and 32-Bit PCI interface with PCI 2.2 spec and a 6-Pin phoenix connector.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The SST-DHP-PCI is a PCI interface card that is for communication with Data Highway Plus (DH+) networks. Many prominent features are available in the card such as a fully compliant 33 MHz and 32-bit PCI interface that is compliant with PCI 2.2 spec and 6-pin phoenix connector. The card features a 29.4912 MHz Z-182 microprocessor with 64K of RAM. It has a shared RAM of 64K with data rates of 75.6k baud, 115.2k baud, and 230.4k baud. Visual indicators are also available in the card that shows card status and network status. The PCI edge connector of the card can plug into any 2.1 and 2.2 PCI compliant motherboard. The card needs a motherboard connector that can deliver the power of 3.3 and 5.5 Volts. Two bi-color LEDs are available on the card that are visible through the mounting bracket. The light emitting diodes nearest to the printed circuit board of the card are network LED. The SYS LED is furthest from the printed circuit board of the card.
The system of the SST-DHP-PCI has few requirements for the installation and operation of the card that must be met before initiating the installation. The card will operate in PCI 2.1 compliant systems with a power supply of 3.3 Volts or available PCI 2.2 and 2.3 slots. At least one physical interrupt must be present for the installation and operation of the card. The SST-DHP-PCI card has components that are sensitive to electrostatic charge. Careful handling is required for the handling of the card. The card establishes communication as single or more slave racks exploiting 1771 remote I/O.
Brand | Woodhead |
Product Type | Interface Card |
Interface | 33 Megahertz, 32-Bit PCI |
Microprocessor | 29.4912 Megahertz |
RAM | 64K |
Connector | 6-Pin Phoenix |
Data Rates | 57.6, 115.2, and 230.4 Kbaud |
LED Indicators | Network, System |
Ambient Storage Temperature | -40 to 85 degrees Celsius |
Ambient Operating Temperature | 0 to 50 degrees Celsius |
Humidity | 5% to 95% (non-condensing) |
Dimensions | 4.2 x 6.875 inches |
Manufacturer | Molex/Woodhead/SST |
Model | SST-DHP-PCI |
Operating Temperature | 0-50 degrees Celsius |
Typical Current Draw | 220 milliamperes |
Height | 4.2 inches |
Width | 6.87 inches |
PCI Compliance | Compliant with PCI 2.2 and 2.3 |
Product Family | SST-DHP-PCI |
PCI Interrupt | Yes (1 Available) |
Visual Indicators | Available |
Question: Does Automation Stop offer repairs on the SST-DHP-PCI?
Answer: Yes. We offer repairs for the SST-DHP-PCI and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and SST-DHP-PCI?
Answer: If you buy the SST-DHP-PCI through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the SST-DHP-PCI online?
Answer: Yes. Automation Stop sells the SST-DHP-PCI online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the SST-DHP-PCI?
Answer: The SST-DHP-PCI is made by Allen Bradley - Miscellaneous.
Question: What is the Ambient Operating Temperature of the Allen Bradley/Rockwell Automation SST-DHP-PCI?
Answer: The Allen Bradley/Rockwell Automation SST-DHP-PCI has a Ambient Operating Temperature of 0 to 50 degrees Celsius.
Question: What is the Ambient Storage Temperature of the SST-DHP-PCI?
Answer: The SST-DHP-PCI has a Ambient Storage Temperature of -40 to 85 degrees Celsius.
Question: What Brand is included with the SST-DHP-PCI?
Answer: The Allen Bradley/Rockwell Automation SST-DHP-PCI has a Woodhead Brand.
Question: What is the Connector of the SST-DHP-PCI?
Answer: The Rockwell Automation SST-DHP-PCI has a Connector of 6-Pin Phoenix.
Question: What is the Data Rates of the SST-DHP-PCI?
Answer: The Data Rates of the SST-DHP-PCI is 57.6, 115.2, and 230.4 Kbaud.
Question: What Dimensions does the SST-DHP-PCI have?
Answer: The Dimensions of the Allen Bradley/Rockwell Automation SST-DHP-PCI is 4.2 x 6.875 (in).
Question: What is the Height of the SST-DHP-PCI?
Answer: The SST-DHP-PCI has a Height of 4.2 inch.
Question: What is the Humidity of the SST-DHP-PCI?
Answer: The Humidity of the SST-DHP-PCI is 5% to 95% (non-condensing).
Question: What is the Interface of the SST-DHP-PCI?
Answer: The SST-DHP-PCI has a Interface of 33 Megahertz, 32-Bit PCI.
Question: What kind of LED Indicators does the SST-DHP-PCI have?
Answer: The SST-DHP-PCI has LED Indicators Network, System.
Question: What is the Microprocessor of the SST-DHP-PCI?
Answer: The Microprocessor of the Allen-Bradley SST-DHP-PCI is 29.4912 Megahertz.
Question: What Model does the Rockwell Automation SST-DHP-PCI have?
Answer: The SST-DHP-PCI has a SST-DHP-PCI Model.
Question: What is the Operating Temperature of the SST-DHP-PCI?
Answer: The SST-DHP-PCI has a Operating Temperature of 0-50 degrees Celsius.
Question: What is the PCI Compliance of the Rockwell Automation SST-DHP-PCI?
Answer: The SST-DHP-PCI has a PCI Compliance of Compliant with PCI 2.2 and 2.3.
Question: Does the SST-DHP-PCI have a PCI Interrupt?
Answer: Yes (1 Available).
Question: What Product Family is included with the Allen-Bradley SST-DHP-PCI?
Answer: The Allen-Bradley SST-DHP-PCI has a SST-DHP-PCI Product Family.
Question: What Product Type is included with the SST-DHP-PCI?
Answer: The SST-DHP-PCI has a Interface Card Product Type.
Question: What is the random-access random-access memory (RAM) (RAM) of the Allen Bradley-Rockwell Automation SST-DHP-PCI?
Answer: The Allen Bradley-Rockwell Automation SST-DHP-PCI has a random-access random-access memory (RAM) (RAM) of 64K.
Question: What Typical Current Draw does the SST-DHP-PCI have?
Answer: The Typical Current Draw of the Allen Bradley Automation SST-DHP-PCI is 220 milliamperes.
Question: What kind of Visual Indicators does the Allen Bradley Automation SST-DHP-PCI have?
Answer: The SST-DHP-PCI includes Available for its Visual Indicators.
Question: What Width does the SST-DHP-PCI have?
Answer: The Allen Bradley SST-DHP-PCI has a Width of 6.87 (in).
For additional information about SST-DHP-PCI check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding SST-DHP-PCI.
Revision Part # | Also Known As | Availability |
---|---|---|
SST-DHP-PCI/A | SST-DHP-PCI Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.