GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

TL-A220P-HJ32AN

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: TL-A220P-HJ32AN
Series: TLY and TL Servo Motors

Description:

Part number TL-A220P-HJ32AN, which was manufactured by Allen-Bradley, is a high-performance, low-inertia servo motor with a rotating speed of up to 5000 rpm. It has a NEMA 23 frame and a magnet stack length of 20 inches. To secure the unit, the servo motor's couplings are designed to spin into a rigid configuration during installation. The O-ring connector also reduces vibration at the cable-to-motor connections. This device is capable of operating with a constant shaft load.


Key Features:

  • has 200 volts of voltage
  • has rated speed of 5000 rpm
  • ships with cables with rectangular connectors, 300 mm connector

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The TL-A220P-HJ32AN is an Allen-Bradley servo motor. It belongs to the TL series of low inertia motors and is a high-performance servo motor. This machine is rated for 200 volts AC and has a 5000 revolutions per minute (rpm) spinning speed. The magnetic stack length of the TL-A220P-HJ32AN is 20. The servo motor's connectors are engineered to rotate into a stiff configuration during installation in order to secure the unit. The vibration at the cable to motor connections is also dampened by the O-ring connector. The interior of the O-ring enables the creation of an environmental seal. The connecting cable should have a threaded or quick-lock plug. It's important to make sure that the power cable's shield wires are all grounded. Because the power cable shield may have a high voltage, this precaution is required. This drive is protected by a NEMA 23 enclosure. Heat-emitting equipment should be kept away from the servo motor, and cooling air should be blown across it to maintain it within its operating temperature range. The TL-A220P-HJ32AN servo motor is capable of operating with a constant shaft load. To avoid dirt and moisture ingestion into the bearings of the servo motor, the shaft seal should be maintained, and a good seal should be ensured. It's also important to note that holding brakes are not intended to stop the motor shaft from rotating, nor are they designed to be utilized as a safety precaution. They are made to keep a motor shaft at zero (0) revolutions per minute (rpm) for up to the stated brake's holding torque.

Technical Specifications

Manufacturer Allen Bradley
Series TL-Series Motors
Product Type Brushless AC Synchronous Servo Motors
Kinetix Compatibility -
Frame Sizes Metric only frame sizes
Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets
Cable Extensions 1 m (3.2ft)
Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information
Continuous stall torque 0.086...5.42 N*m (0.76...48 lb*in)
Peak stall torque 0.22...13 N*m (1.94...115 lb*in)
Motor rated output 0.037...2.0 kW
Compatible servo drives Kinetix 3
Voltage Class 200V-class windings
Frame Size 70 mm (2.75 in.) or NEMA 23
Motor stack length Two stack
Rated Speed 5000 rpm
Feedback 2000 lines/revolution, incremental encoder
Enclosure IP65 housing
Shaft key Has Shaft key
Shaft Seal No Shaft seal
Connectors Cables with rectangular connectors, 300 mm (11.8 in.)
Brake No Brake
Factory Options NEMA
MPN TL-A220P-HJ32AN
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the TL-A220P-HJ32AN?

Answer: Yes. We offer repairs for the TL-A220P-HJ32AN and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and TL-A220P-HJ32AN?

Answer: If you buy the TL-A220P-HJ32AN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the TL-A220P-HJ32AN online?

Answer: Yes. Automation Stop sells the TL-A220P-HJ32AN online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the TL-A220P-HJ32AN?

Answer: The TL-A220P-HJ32AN is made by Allen Bradley - Miscellaneous.


Question: What type of product is the TL-A220P-HJ32AN?

Answer: The TL-A220P-HJ32AN is part of the TLY and TL Servo Motors series.


Question: Does the TL-A220P-HJ32AN have a Brake?

Answer: No Brake.


Question: What is the Cable Extensions of the Allen-Bradley TL-A220P-HJ32AN?

Answer: The Cable Extensions of the Allen-Bradley TL-A220P-HJ32AN is 1 m (3.2ft).


Question: What Certifications are included with the Allen Bradley Automation TL-A220P-HJ32AN?

Answer: The TL-A220P-HJ32AN includes TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information for its Certifications.


Question: What is the Compatible servo drives of the TL-A220P-HJ32AN?

Answer: The Compatible servo drives of the TL-A220P-HJ32AN is Kinetix 3.


Question: What Connectors does the TL-A220P-HJ32AN have?

Answer: The Connectors of the Rockwell Automation TL-A220P-HJ32AN is Cables with rectangular connectors, 300 mm (11.8 in.).


Question: What Continuous stall torque does the TL-A220P-HJ32AN have?

Answer: The Continuous stall torque of the Allen Bradley TL-A220P-HJ32AN is 0.086...5.42 N*m (0.76...48 lb*in).


Question: What is the Enclosure of the Allen Bradley TL-A220P-HJ32AN?

Answer: The Allen Bradley TL-A220P-HJ32AN has a Enclosure of IP65 housing.


Question: What kind of Factory Options does the TL-A220P-HJ32AN have?

Answer: The TL-A220P-HJ32AN has Factory Options NEMA.


Question: What Feedback does the Allen Bradley-Rockwell Automation TL-A220P-HJ32AN have?

Answer: The Allen Bradley-Rockwell Automation TL-A220P-HJ32AN has a Feedback of 2000 lines/revolution, incremental encoder.


Question: What Frame Size does the TL-A220P-HJ32AN have?

Answer: The Allen Bradley Automation TL-A220P-HJ32AN has a Frame Size of 70 mm (2.75 in.) or NEMA 23.


Question: What Frame Sizes are included with the Allen Bradley TL-A220P-HJ32AN?

Answer: The TL-A220P-HJ32AN includes Metric only frame sizes for its Frame Sizes.


Question: What Kinetix Compatibility is included with the Allen Bradley TL-A220P-HJ32AN?

Answer: The Allen Bradley TL-A220P-HJ32AN has a - Kinetix Compatibility.


Question: What kind of Magnets does the Allen-Bradley TL-A220P-HJ32AN have?

Answer: The Allen-Bradley TL-A220P-HJ32AN includes High-energy Neodymium-Iron-Boron (NeFeB) magnets for its Magnets.


Question: What Motor rated output does the Allen Bradley TL-A220P-HJ32AN have?

Answer: The Motor rated output of the Allen Bradley TL-A220P-HJ32AN is 0.037...2.0 kW.


Question: What Motor stack length is included with the Allen Bradley-Rockwell Automation TL-A220P-HJ32AN?

Answer: The TL-A220P-HJ32AN has a Two stack Motor stack length.


Question: What is the Peak stall torque of the TL-A220P-HJ32AN?

Answer: The Rockwell Automation TL-A220P-HJ32AN has a Peak stall torque of 0.22...13 N*m (1.94...115 lb*in).


Question: What Product Type is included with the TL-A220P-HJ32AN?

Answer: The TL-A220P-HJ32AN has a Brushless AC (alternating current) Synchronous Servo Motors Product Type.


Question: What is the Rated Speed of the TL-A220P-HJ32AN?

Answer: The Allen Bradley/Rockwell Automation TL-A220P-HJ32AN has a Rated Speed of 5000 revolutions per minute (RPM).


Question: What Shaft key is included with the TL-A220P-HJ32AN?

Answer: The TL-A220P-HJ32AN has a Has Shaft key Shaft key.


Question: Does the Rockwell-Automation TL-A220P-HJ32AN have a Shaft Seal?

Answer: No Shaft seal.


Question: What Voltage Class does the TL-A220P-HJ32AN have?

Answer: The TL-A220P-HJ32AN has a Voltage Class of 200V-class windings.


Series information for TL-A220P-HJ32AN

For additional information about TL-A220P-HJ32AN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TL-A220P-HJ32AN.

Revision Part # Also Known As Availability
TL-A220P-HJ32AN/A TL-A220P-HJ32AN Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • TL-A22OP-HJ32AN

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP