GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

TL-A2530P-HJ34AN

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: TL-A2530P-HJ34AN
Series: TLY and TL Servo Motors

Description:

Part number TL-A2530P-HJ34AN, which was designed and manufactured by Allen Bradley / Rockwell Automation, is a TL series servo motor. This motor, which is classified as a low inertia servo motor, has a voltage rating of 230 volts AC. This motor has a flange size of 90 mm, or NEMA 34. The rated speed of this motor is 5000 rpm. It has an IP65 housing with a shaft key. It is also equipped with a 24 volts DC brake. The operating temperature of this motor range from 0 to 40 degrees Celsius.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The TL series of products includes the Allen Bradley / Rockwell Automation TL-A2530P-HJ34AN low inertia servo motor. The TL-A2530P-H34AN operates on a 230 volts AC, three (3)-phase configuration. This servo drive has a NEMA 34 frame size, which is the equivalent of 90 millimeters. The servo drive has a speed rating of 5000 revolutions per minute (rpm). It features an incremental encoder for feedback purposes. This servo motor has an IP65 rated housing with a shaft key, but no shaft seal. This servo motor is equipped with a 24 volts DC brake. It also has a NEMA mounting flange and shaft. The TL-A2530P-HJ34AN is power efficient and provides a cost-effective solution. This drive can be utilized in many applications. These servo motors have a compact design and are intended to deliver a large amount of power in a small amount as well as high torque density due to the stator design. The TL-A2530P-HJ34AN low inertia servo motor also features built-in memory to maintain motor identity, such as serial communication for automatic motor status reporting. These variable speed drives make it possible to control a high load/motor ratio while maintaining a stable system. The Allen Bradley TL-A2530P-HJ34AN servo motor has a carbon steel shaft and shaft key. The operating temperature of this servo motor ranges from 0 to 40 degrees Celsius, or 32 to 104 degrees Fahrenheit. When storing this product, the area should have a temperature within a range of -10 and 85 degrees Celsius. The relative humidity should be 20 percent to 85 percent and have no condensation. 

 

Technical Specifications

Manufacturer Allen Bradley
Series TL-Series Motors
Product Type Brushless AC Synchronous Servo Motors
Kinetix Compatibility -
Frame Sizes Metric only frame sizes
Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets
Cable Extensions 1 m (3.2ft)
Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information
Continuous stall torque 0.086...5.42 N*m (0.76...48 lb*in)
Peak stall torque 0.22...13 N*m (1.94...115 lb*in)
Motor rated output 0.037...2.0 kW
Compatible servo drives Kinetix 3
Voltage Class 200V-class windings
Frame Size 90 mm (3.54 in.) or NEMA 34
Motor stack length Three stack
Rated Speed 5000 rpm
Feedback 2000 lines/revolution, incremental encoder
Enclosure IP65 housing
Shaft key Has Shaft key
Shaft Seal No Shaft seal
Connectors Cables with rectangular connectors, 300 mm (11.8 in.)
Brake 24V DC Brake
Factory Options NEMA
MPN TL-A2530P-HJ34AN
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the TL-A2530P-HJ34AN?

Answer: Yes. We offer repairs for the TL-A2530P-HJ34AN and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and TL-A2530P-HJ34AN?

Answer: If you buy the TL-A2530P-HJ34AN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the TL-A2530P-HJ34AN online?

Answer: Yes. Automation Stop sells the TL-A2530P-HJ34AN online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the TL-A2530P-HJ34AN?

Answer: The TL-A2530P-HJ34AN is made by Allen Bradley - Miscellaneous.


Question: What type of product is the TL-A2530P-HJ34AN?

Answer: The TL-A2530P-HJ34AN is part of the TLY and TL Servo Motors series.


Question: What Brake does the TL-A2530P-HJ34AN have?

Answer: The TL-A2530P-HJ34AN has a Brake of 24 volts DC Brake.


Question: What is the Cable Extensions of the TL-A2530P-HJ34AN?

Answer: The Rockwell-Automation TL-A2530P-HJ34AN has a Cable Extensions of 1 m (3.2ft).


Question: What Certifications are included with the Rockwell-Automation TL-A2530P-HJ34AN?

Answer: The Rockwell-Automation TL-A2530P-HJ34AN has Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information.


Question: What is the Compatible servo drives of the Allen Bradley/Rockwell Automation TL-A2530P-HJ34AN?

Answer: The Allen Bradley/Rockwell Automation TL-A2530P-HJ34AN has a Compatible servo drives of Kinetix 3.


Question: What is the Connectors of the TL-A2530P-HJ34AN?

Answer: The TL-A2530P-HJ34AN has a Connectors of Cables with rectangular connectors, 300 mm (11.8 in.).


Question: What is the Continuous stall torque of the TL-A2530P-HJ34AN?

Answer: The Continuous stall torque of the TL-A2530P-HJ34AN is 0.086...5.42 N*m (0.76...48 lb*in).


Question: What is the Enclosure of the TL-A2530P-HJ34AN?

Answer: The Enclosure of the Allen Bradley Automation TL-A2530P-HJ34AN is IP65 housing.


Question: What Factory Options are included with the TL-A2530P-HJ34AN?

Answer: The Allen Bradley/Rockwell Automation TL-A2530P-HJ34AN has Factory Options NEMA.


Question: What Feedback does the Rockwell Automation TL-A2530P-HJ34AN have?

Answer: The Rockwell Automation TL-A2530P-HJ34AN has a Feedback of 2000 lines/revolution, incremental encoder.


Question: What is the Frame Size of the Allen-Bradley TL-A2530P-HJ34AN?

Answer: The TL-A2530P-HJ34AN has a Frame Size of 90 mm (3.54 in.) or NEMA 34.


Question: What Frame Sizes are included with the TL-A2530P-HJ34AN?

Answer: The TL-A2530P-HJ34AN includes Metric only frame sizes for its Frame Sizes.


Question: What Kinetix Compatibility does the TL-A2530P-HJ34AN have?

Answer: The TL-A2530P-HJ34AN has a - Kinetix Compatibility.


Question: What kind of Magnets does the Allen Bradley Automation TL-A2530P-HJ34AN have?

Answer: The TL-A2530P-HJ34AN has Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets.


Question: What is the Motor rated output of the TL-A2530P-HJ34AN?

Answer: The Motor rated output of the TL-A2530P-HJ34AN is 0.037...2.0 kW.


Question: What Motor stack length is included with the Allen Bradley/Rockwell Automation TL-A2530P-HJ34AN?

Answer: The TL-A2530P-HJ34AN has a Three stack Motor stack length.


Question: What is the Peak stall torque of the TL-A2530P-HJ34AN?

Answer: The TL-A2530P-HJ34AN has a Peak stall torque of 0.22...13 N*m (1.94...115 lb*in).


Question: What Product Type is included with the TL-A2530P-HJ34AN?

Answer: The TL-A2530P-HJ34AN has a Brushless alternating current (AC) Synchronous Servo Motors Product Type.


Question: What is the Rated Speed of the TL-A2530P-HJ34AN?

Answer: The TL-A2530P-HJ34AN has a Rated Speed of 5000 revolutions per minute (RPM).


Question: What Shaft key does the Rockwell-Automation TL-A2530P-HJ34AN have?

Answer: The TL-A2530P-HJ34AN has a Has Shaft key Shaft key.


Question: Does the Rockwell-Automation TL-A2530P-HJ34AN have a Shaft Seal?

Answer: No Shaft seal.


Question: What is the Voltage Class of the TL-A2530P-HJ34AN?

Answer: The Voltage Class of the Rockwell-Automation TL-A2530P-HJ34AN is 200V-class windings.


Series information for TL-A2530P-HJ34AN

For additional information about TL-A2530P-HJ34AN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TL-A2530P-HJ34AN.

Revision Part # Also Known As Availability
TL-A2530P-HJ34AN/A TL-A2530P-HJ34AN Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • TL-A253OP-HJ34AN
  • TL-A2S30P-HJ34AN
  • TL-A2S3OP-HJ34AN

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP