GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | TL-A2540P-HJ32AN |
Series: | TLY and TL Servo Motors |
Description:
Allen-Bradley's TL-A2540P-HJ32AN is a servo motor. It is a low-inertia motor from the TL-series. It features a NEMA 34 frame size and a magnet stack length of 40 and is rated for a 5000-rpm rotational speed. Moreover, the TL-series servo motors' connectors and flying leads are all certified for ingress protection standard environmental protection. This module was built with characteristics in mind to extend the operational life expectancy. A drip loop is built into the cables to aid in the evacuation of water from the module connections.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Produced and designed by Allen-Bradley, this servo motor is a low inertia servo motor from the TL-series and it has a rotational speed of up to five thousand (5000) revolutions per minute. Moreover, this module has a two hundred (200)-volt input voltage rating and the frame size of the motor is NEMA 34, or ninety (90) mm, and the magnet stack length of this module is forty (40). This Allen-Bradley device also has an incremental encoder feedback rating of two thousand (2000) lines per revolution. In addition to that, the rectangular connector cables on this servo motor are three hundred (300) millimeters long.
This device is also protected against dust and water jets by an IP 65 rated enclosure and an optional shaft seal with an IP 65 safety rating is available. Furthermore, the connectors and flying leads on the TL-series servo motors are all rated for ingress protection standard environmental protection. Allen-Bradley has designed this module with features that extend the operational life of the servo motor in mind. The cables are designed with a drip loop to aid in the removal of water from the module connections.
To ensure reliable operation, the shaft seals, junctions, and motor housing must be kept clean and free of contaminants and fluids. Shields could be used to protect these critical components, depending on the application design. Furthermore, the seal on the motor is also sensitive to dry and dusty environments, and regular inspections at six-month intervals are recommended to prevent premature wear.
Manufacturer | Allen Bradley |
Series | TL-Series Motors |
Product Type | Brushless AC Synchronous Servo Motors |
Kinetix Compatibility | - |
Frame Sizes | Metric only frame sizes |
Magnets | High-energy Neodymium-Iron-Boron (NeFeB) magnets |
Cable Extensions | 1 m (3.2ft) |
Certifications | TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information |
Continuous stall torque | 0.086...5.42 N*m (0.76...48 lb*in) |
Peak stall torque | 0.22...13 N*m (1.94...115 lb*in) |
Motor rated output | 0.037...2.0 kW |
Compatible servo drives | Kinetix 3 |
Voltage Class | 200V-class windings |
Frame Size | 90 mm (3.54 in.) or NEMA 34 |
Motor stack length | Four stack |
Rated Speed | 5000 rpm |
Feedback | 2000 lines/revolution, incremental encoder |
Enclosure | IP65 housing |
Shaft key | Has Shaft key |
Shaft Seal | No Shaft seal |
Connectors | Cables with rectangular connectors, 300 mm (11.8 in.) |
Brake | No Brake |
Factory Options | NEMA |
MPN | TL-A2540P-HJ32AN |
Question: Does Automation Stop offer repairs on the TL-A2540P-HJ32AN?
Answer: Yes. We offer repairs for the TL-A2540P-HJ32AN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and TL-A2540P-HJ32AN?
Answer: If you buy the TL-A2540P-HJ32AN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the TL-A2540P-HJ32AN online?
Answer: Yes. Automation Stop sells the TL-A2540P-HJ32AN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the TL-A2540P-HJ32AN?
Answer: The TL-A2540P-HJ32AN is made by Allen Bradley - Miscellaneous.
Question: What type of product is the TL-A2540P-HJ32AN?
Answer: The TL-A2540P-HJ32AN is part of the TLY and TL Servo Motors series.
Question: Does the Allen Bradley-Rockwell Automation TL-A2540P-HJ32AN have a Brake?
Answer: No Brake.
Question: What Cable Extensions does the TL-A2540P-HJ32AN have?
Answer: The TL-A2540P-HJ32AN has a Cable Extensions of 1 m (3.2ft).
Question: What kind of Certifications does the Rockwell Automation TL-A2540P-HJ32AN have?
Answer: The TL-A2540P-HJ32AN includes TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information for its Certifications.
Question: What Compatible servo drives does the Allen Bradley Automation TL-A2540P-HJ32AN have?
Answer: The TL-A2540P-HJ32AN has a Compatible servo drives of Kinetix 3.
Question: What Connectors does the TL-A2540P-HJ32AN have?
Answer: The Connectors of the TL-A2540P-HJ32AN is Cables with rectangular connectors, 300 mm (11.8 in.).
Question: What is the Continuous stall torque of the TL-A2540P-HJ32AN?
Answer: The Allen Bradley TL-A2540P-HJ32AN has a Continuous stall torque of 0.086...5.42 N*m (0.76...48 lb*in).
Question: What Enclosure does the Allen Bradley Automation TL-A2540P-HJ32AN have?
Answer: The Enclosure of the TL-A2540P-HJ32AN is IP65 housing.
Question: What kind of Factory Options does the TL-A2540P-HJ32AN have?
Answer: The Allen Bradley Automation TL-A2540P-HJ32AN has Factory Options NEMA.
Question: What Feedback does the TL-A2540P-HJ32AN have?
Answer: The Feedback of the Allen Bradley TL-A2540P-HJ32AN is 2000 lines/revolution, incremental encoder.
Question: What is the Frame Size of the TL-A2540P-HJ32AN?
Answer: The Frame Size of the Allen Bradley TL-A2540P-HJ32AN is 90 mm (3.54 in.) or NEMA 34.
Question: What kind of Frame Sizes does the TL-A2540P-HJ32AN have?
Answer: The Rockwell Automation TL-A2540P-HJ32AN includes Metric only frame sizes for its Frame Sizes.
Question: What Kinetix Compatibility is included with the TL-A2540P-HJ32AN?
Answer: The TL-A2540P-HJ32AN has a - Kinetix Compatibility.
Question: What Magnets are included with the TL-A2540P-HJ32AN?
Answer: The TL-A2540P-HJ32AN has Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets.
Question: What is the Motor rated output of the Allen Bradley TL-A2540P-HJ32AN?
Answer: The TL-A2540P-HJ32AN has a Motor rated output of 0.037...2.0 kW.
Question: What Motor stack length is included with the TL-A2540P-HJ32AN?
Answer: The Allen-Bradley TL-A2540P-HJ32AN has a Four stack Motor stack length.
Question: What is the Peak stall torque of the Rockwell Automation TL-A2540P-HJ32AN?
Answer: The Peak stall torque of the TL-A2540P-HJ32AN is 0.22...13 N*m (1.94...115 lb*in).
Question: What Product Type is included with the Allen Bradley TL-A2540P-HJ32AN?
Answer: The TL-A2540P-HJ32AN has a Brushless alternating current (AC) Synchronous Servo Motors Product Type.
Question: What is the Rated Speed of the Allen Bradley TL-A2540P-HJ32AN?
Answer: The Rated Speed of the Allen Bradley TL-A2540P-HJ32AN is 5000 revolutions per minute (RPM).
Question: What Shaft key is included with the TL-A2540P-HJ32AN?
Answer: The Rockwell-Automation TL-A2540P-HJ32AN has a Has Shaft key Shaft key.
Question: Does the TL-A2540P-HJ32AN have a Shaft Seal?
Answer: No Shaft seal.
Question: What is the Voltage Class of the TL-A2540P-HJ32AN?
Answer: The TL-A2540P-HJ32AN has a Voltage Class of 200V-class windings.
For additional information about TL-A2540P-HJ32AN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TL-A2540P-HJ32AN.
Revision Part # | Also Known As | Availability |
---|---|---|
TL-A2540P-HJ32AN/A | TL-A2540P-HJ32AN Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.