The 2080-LC30-10QWB is a programmable controller module from the Micro830 series of products. This controller module is used for interfacing, connectivity, and seamless integration. This module was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This device has a total of ten (10) input / output channels. These channels are divided into six (6) input channels and four (4) output channels. The supported input channels are 24 volts sink/source, whereas the output channels are relay outputs. This controller module is equipped with an RS-232/RS-485 non-isolated combo serial port used for communication purposes. This programmable controller module has a power consumption rating of five (5) watts. Additionally, the power supply voltage range of this device is 20.4 volts DC to 26.4 volts DC. This programmable controller module has a maximum off-state voltage rating of 5 volts DC. The on-state voltage range of this device is 16.8 to 26.4 volts DC at 65 degrees Celsius and 16.8 to 30.0 volts DC at 30 degrees Celsius. The maximum off-state current is 1.5 milliamperes. The minimum on-state current of this controller module is 5.0 milliamperes at 16.6 volts DC, while its maximum on-state current is 12.0 milliamperes at 30 volts DC. The nominal on-state current rating, however, is 7.6 milliamperes at 24 volts DC. This Allen Bradley programmable controller module has a nominal impedance of three (3) kilo ohms. The operating voltage of this module should range from -20 to 65 degrees Celsius, while the non-operating temperature should range from -40 to 85 degrees Celsius. 

The Allen Bradley 2080-LC30-10QWB programmable controller has physical dimensions that measure 90 millimeters x 100 millimeters x 80 millimeters, or 3.54 inches x 3.94 inches x 3.15 inches (height x width x depth). Additionally, the approximate weight of this unit is 0.302 kilograms, or the equivalent of 0.666 pounds. This product supports the use of a solid wiring cable with a minimum wire size of 0.14 mm² (26 AWG) and a maximum wire size of 2.5 mm² (14 AWG). This unit also supports the use of stranded wiring cables that have a minimum wire size of 0.14 mm² (26 AWG) and a maximum wire size of 1.5 mm² (16 AWG). The Allen Bradley 2080-LC30-10QWB has an isolation voltage of 250 volts continuous. This product has reinforced insulation. It has a minimum output voltage of 5 volts DC and 5 volts AC, as we ll as a maximum output voltage of 125 volts DC and 265 volts AC. The minimum load current of this programmable controller is 10 milliamperes, while the maximum load current is 2.0 amperes. This controller has a maximum current of 1440V amperes with a maximum current per common of 5 amperes. The maximum turn on time, as well as the maximum turn off time, is 10 milliseconds. The relative humidity levels suitable for this product range from 5% to 95% non-condensing. This Allen Bradley programmable controller can withstand an operating shock rated up to 25 G. It can also withstand a non-operating shock rated up to 25 G when mounted via a DIN rail and 45 G when mounted via a panel mount.