A product of Allen Bradley / Rockwell Automation, product number 2094-AC09-M02-S is an integrated axis module, or IAM. This device belongs to the Kinetix 6000 series of products. This device is classified as a 230-volt axis module. It has an alternating current (AC) input voltage of 195 to 264 volts AC rms, as well as a nominal input voltage of 230 volts AC. The AC input frequency range of this IAM is 47 to 63 hertz. This device has a nominal AC input current rated at 19 amperes. Additionally, the maximum inrush AC input current is rated at 33 amperes. This Allen Bradley axis module has a nominal bus output voltage of 325 volts DC. The line loss ride through time of this IAM is 20 milliseconds. This device has a continuous output current of 19 amperes to the bus, with an intermittent output current of 38 amperes to the bus. The bus overvoltage rating for this unit is 425 volts DC, while the bus undervoltage rating is 138 volts DC. The internal shunt of this IAM has a continuous power rated at 50 watts, while the peak power of the internal shunt is rated at 8000 watts. The internal shunt resistor is rated at 20 ohms. This integrated axis module has a shunt on rating of 405 volts, as well as a shunt off rating 375 volts DC. the efficiency rating of this Allen Bradley integrated axis module is 95 percent. This product weighs approximately 2.31 kilograms, or roughly 5.1 pounds.

The Allen Bradley 2094-AC09-M02-S integrated axis module has a DC input voltage ranging from 275 to 375 volts DC, along with an input current rated at 19 amperes. The control power AC input voltage range of this module is 95 to 264 volts AC rms, single-phase. This product has a nominal control power input current of 3 amperes rms at 220/230 volts AC and 6 amperes rms at 110/115 volts AC. Additionally, the maximum inrush control power AC input current is rated at 20 amperes from 0 to peak performance. The nominal bus output voltage of the 2094-AC09-M02-S is 325 volts DC. It has a line loss ride through rating of 20 milliseconds. The continuous output current to bus rating is 19 amperes, while the intermittent output current to bus rating is 38 amperes. This Allen Bradley module has a continuous power output to bus rating of 6 kilowatts. The peak power output of this device is 12 kilowatts. It has a converter capacitance rating of 540 microfarad. The Allen Bradley 2094-AC09-M02-S integrated axis module should be operated within an area where the temperature ranges from 0 to 50 degrees Celsius, or the equivalent temperature range of 32 to 122 degrees Fahrenheit. Additionally, when storing this device, the temperature of the surrounding area should range from -40 to 70 degrees Celsius, or -40 to 158 degrees Fahrenheit. The relative humidity suitable for this product's operation ranges from 5% to 95% non-condensing. This module can withstand a shock rated up to 15 G for a duration of 11 milliseconds.