The Allen-Bradley 2094-BC07-M05-M integrated axis module (IAM) without safe torque-off characteristic includes an inverter and converter parts. The Allen-Bradley 2094-BC07-M05-M IAM module should be supplied with an AC input power for logic circuitry. The Allen-Bradley 2094-BC07-M05-M IAM module supports an input voltage of 380 volts AC and an input current of 71 amperes. The Allen-Bradley 2094-BC07-M05-M IAM module provides two registration inputs and four inputs for the machine interface. This module can be used in industrial applications to offer a kinetix integrated motion solution for a motor, drive or actuator applications. The Allen-Bradley 2094-BC07-M05-M includes three status LED indicators which are automatically on once this Allen-Bradley 2094-BC07-M05-M is supplied with the electrical power and one seven-segment for fault status. The Allen-Bradley 2094-BC07-M05-M can be mounted easily on the power rail.



The Allen-Bradley 2094-BC07-M05-M IAM module protects the motor short circuit by using an internal and integrated solid-state protection. The Allen-Bradley 2094-BC07-M05-M IAM draws a current of 67 amps. The Allen-Bradley 2094-BC07-M05-M IAM module is intended for use in a mainly industrial environment that is clean and dry and nonhazardous locations. This hardware can operate at a temperature range of 0 degrees to 50 degrees Celsius (32 degrees to 122 degrees Fahrenheit) and weighs approximately 10.1 kilograms (22 pounds) while shipping.

The IAM power module of 2094-BC07-M05-M has AC input power of LPJ-80SP (80 A) Bussmann Fuse and Allen-Bradley Circuit Breaker 140U-H6C3-C90 Magnetic Contactor and Control input power FNQ-R-10 (10 A) or FNQ-R-7.5 (7.5 A) Bussmann Fuse. Use FNQ-R-7.5 fuse for higher single-cycle inrush current capability. This is recommended when the continuous control power current exceeds 3.0 A. Allen-Bradley Circuit Breaker 1492-SP2D060 or 1492-SP1D150 used in control input power. Use 1492-SP1D150 circuit breaker for higher single-cycle inrush current capability. This is recommended when the continuous control power current exceeds 3.0 A. this model uses DC Common Bus Fuse FWJ-125A Bussmann Fuse and A70QS125-4 Mersen Fuse. Mersen fuses were formerly known as Ferraz Shawmut. 100-C85x10 (AC coil) and 100-C85xx10 (DC coil) contactor ratings are recommended for IAM power modules installed without a LIM module. The weight for this Bulletin 2094 Drive Module IAM (400V-class) weight 9.98 kg (22.0 lbs). Vibration can range 5-55 Hz @ 0.35 mm (0.014 in.) double amplitude, continuous displacement; 55-500 Hz @ 2.0 g peak constant acceleration (10 sweeps in each of 3 mutually perpendicular directions). This module dissipates 71W power when used 20% of the rated power, 101W when 40%, 137W with 60%, 179W by 80%, and 226W by 100% power rated. This makes it the highest power dissipation value of the IAM (converter) power module. Main AC input power cycling is 4.30 cycles (cycles per minute for 10,000 µf). The relay output of the Bulletin 2094 IAM/AM module (MBRK± BC-5 and BC-6) is suitable for directly controlling a motor brake, subject to the relay voltage limit of 30V DC. The brake replay current limit for this module is 3.0 A maximum.