The 2094-BM05-S is an integrated axis module. It falls into the category of 400 Volt Class drive components. This component is mainly used on Kinetix 6000 drives. It was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This device requires an input voltage range of 400 Volts AC from a power supply to operate properly. It has a continuous current supply of 34.6 amperes. Additionally, this module has a peak current rating of 48.9 amperes. This product has an efficiency rating of up to ninety-eight (98) percent. In addition to that, the short circuit rating of this Allen Bradley product is two hundred thousand (200,000) root means square (rms), which is primarily used by the symmetrical and integrated safe torque off functions. Furthermore, this Allen Bradley drive component has an internal shunt resistance rating of 28.76 ohms. The continuous current rating applicable for this integrated axis module is 34.6 amperes. The peak current rating of this module is 69.2 amperes. The nominal output rated power of this module is 22 kilowatts. Aside from that, the drive voltage range of this axis module is 360 to 480 volts for a three-phase input power system. The internal shunt's continuous power rating is 200 watts and the peak power is 22.5 kilowatts. The capacitance range of this unit is 1175 microfarad, and the bandwidth velocity loop is 500 Hz. The bandwidth current loop is 1300 Hz. This module's approximate weight is 4.98 kilograms, or the equivalent of 11.0 pounds.

The 2094-BM05-S axis module from Allen Bradley / Rockwell Automation has a peak current rating of 51.9 amperes rms. Additionally, it has a peak current rating of 73.4 amperes from 0 to peak performance. The PWM frequency of this unit is four (4) kilohertz. This axis module has a shunt on rating of eight hundred and five (805) volts direct current (DC), as well as a shunt off rating of seven hundred and fifty-five (755) volts direct current (DC). The Allen Bradley 2094-BM05-S has a capacitive energy absorption rating of 152 Joules. This Allen Bradley product has physical dimensions that measure 436 millimeters x 141 millimeters x 249 millimeters, or 17.2 inches x 5.5 inches x 9.8 inches (height x width x depth). The Allen Bradley 2094-BM05-S should be operated in an area where the temperature ranges from 0 to 50 degrees Celsius, or the equivalent temperature range of 32 to 122 degrees Fahrenheit. However, if this module is not being operated, or needs to be stored, the temperature of the surrounding area should range from -40 to 70 degrees Celsius, or -40 to 158 degrees Fahrenheit. The relative humidity levels suitable for this device's operation, as well as for when this device needs to be stored, ranges from five (5) percent to ninety-five (95) percent non-condensing. This unit should not be operated at an altitude exceeding one thousand (1000) meters, or 3281 feet. If this device is operated above this altitude level, derating could occur. This Allen Bradley product is capable of withstanding a shock rated up to 15 G for a duration of 11 milliseconds.