The 2094-BMP5-S is an axis module (AM) from the Kinetix 6000 product family. This module is manufactured by Allen Bradley / Rockwell Automation. This axis module drive has a 97% efficiency rating. This Kinetix 6000 axis module comes with built-in inputs, such as two (2) registration inputs, one (1) home input, two (2) over-travel inputs, and one (1) axis enable input, enabling this drive to be hardwired with an adequate signaling device to perform monitoring and control functions. This is a 400-volt module. The continuous output current of this device is 2.8 amperes rms. The continuous output current from 0 to peak performance is 4.0 amperes. This axis module has a rated output power of 1.8 kilowatts. The nominal voltage drive of this axis module (AM) is 360 to 480 volts, three-phase. Additionally, the nominal input voltage of this unit is 650 volts DC. The velocity loop bandwidth of this Kinetix 6000 axis module is rated at 500 hertz, while the current loop bandwidth is rated at 1300 hertz. Aside from that, the internal shunt of this module has a continuous power rating of 50 watts, while the internal shunt's peak power is 5.6 kilowatts. The internal shunt resistor of this unit is rated at 115 ohms. This Allen Bradley axis module has Safe Torque Off functions that aids in preventing restarts, especially when the safety circuits are tripped. This Kinetix 6000 axis module has physical dimensions that measure 272 millimeters x 70 millimeters x 281 millimeters, or 10.7 inches x 2.76 inches x 11.0 inches.

The Allen Bradley 2094-BMP5-S axis module has a PWM frequency rating of 8 kilohertz. The peak current of this unit is 4.2 amperes rms. This product has an additional peak current rating of 5.9 amperes from 0 to peak performance. The Allen Bradley 2094-BMP5-S has a shunt on rating of 805 volts direct current (DC). It also has a shunt off rating of 755 volts direct current (DC). The capacitance rating of this device is 75 microfarad. Additionally, this product has a capacitive energy absorption rating of 10 Joules. The approximate weight of this Allen Bradley module is 2.44 kilograms, or the equivalent of 5.4 pounds. This Allen Bradley module should be operated within an environment where the temperature ranges from 0 to 50 degrees Celsius, or the equivalent temperature range of 32 to 122 degrees Fahrenheit. Additionally, the relative humidity of the operating area should have levels that range from 5% to 95% non-condensing. Furthermore, this device should be operated at altitudes of up to, but not exceeding, 1000 meters (3281 feet). When this axis module is being stored, the temperature of the surrounding environment should range from -40 to 70 degrees Celsius, or -40 to 158 degrees Fahrenheit. The relative humidity levels of the storage area should range from 5% to 95% non-condensing, as well. Additionally, when this device is being stored, it should not exceed an altitude of 3000 meters, of 9843 feet. This Allen Bradley axis module can withstand a shock rated up to 15 G for a duration of 11 milliseconds.