The 22F-D6P0N113 from Allen-Bradley's Series A drive is an adjustable frequency PowerFlex 4M drive. This drive runs on a three-phase voltage, making it only suitable for three-phase applications. Adjustable frequency drives are designed to be used in conjunction with induction and electromechanical motors that operate at a variable speed. This drive enables these motors to serve at smooth and regulated speeds while avoiding harm to the motor's physical structure and extending its life. The 22F-D6P0N113 from Allen-Bradley PowerFlex 4M Series variable frequency drive runs at 480 Volts AC, 6 Amps current, and 50/60 Hertz frequency. If suitably derated, this drive may be utilized in single-phase applications. All of its specs must match those of the motor.

When it appears to set up, the Allen-Bradley 22F-D6P0N113 variable frequency drive offers an IP 20-rated panel-mounted casing that defends the drive from hard metallic particles that may enter and impair the drive's overall performance. This enclosure does not defend the drive from the environment's substances and corrosive vapors. This drive has a filter and an IGBT brake. A fixed keypad is included with the Allen-Bradley PowerFlex 4M changeable frequency drive. Operators and supervisors may input data and alter process variables using this keypad; it also has status indicators that indicate the drive's state. To reduce power loss, motor wires must be maintained as short as possible.

Driver ambient temperatures of approximately 50°C (122°F) are allowed with little spacing between drives, and the enclosure has an IP20 rating with an open-type design and slide compensation for increased stability. Additionally, drive overload protection and ramp control are provided. Also, side-by-side zero stacking drives are available at max. 40 °C (104 °F) of ambient temperatures.

Allen-Bradley manufactures the 22F-D6P0N113 AC drive, which requires a 480 volt AC power, 3-Phase, 50/60 hertz frequency band. The 22F-D6P0N113 is a variable frequency AC drive and belongs to the PowerFlex 4M product line, and this one is the smallest and most cost-effective. It has a tight fit and provides strong machine-level speed control. This drive unit provides an output of 2.2 kilowatts (3.0 Hp) power and a current flow of 6.0 amps.  This product also has a power input of 5.2 kVA and 6.2 amps current flows with a voltage range of 340 to 528 volts, which are required to operate the drive. This module must be installed in an IP20 NEMA/UL type open housing (enclosure) and available panel-mounted features. It features a permanent keypad interface module and an integrated EMC filter that complies with EN61800-3. This unit's ten fuse capacity offers additional branch circuit protection. To achieve optimal performance, the 22F-D6P0N113 AC drive unit utilizes Volts/ Hertz (V/Hz) mechanism. It includes automatic IR compensation, as well as slip compensation features. Its lay pre-charge feature assists in reducing inrush current, and its configurable PWM frequency (up to 10 kHz) enables a silent operation method. High torque levels are delivered throughout the drive's speed range; this module's superb speed control is noticeable even when the load is raised. Additionally, this AC drive features a detachable MOV, which improves process reliability regardless of whether the drive is connected to an ungrounded or grounded resistive distribution system.

The 22F-D6P0N113 variable AC Drive is compatible with a number of communication configurations. This drive also functions in a multi-drop network setup due to the Integral RS485/DSI connections interface. The drive is compatible with any Allen-Bradley device that supports the DSI interface, as well as with any personal computer, laptop, or pocket PC that supports Bluetooth and some other wireless technologies. Embedded communication modules such as BACnet,  EtherNet/I, LonWorks, ControlNet, DeviceNet, and PROFIBUS DP may be used in conjunction with an exterior DSI communication kit to improve the performance of the machine. This variable AC drive unit is not only constructed for performance and quality but also is simple to use and requires not very big spaces. Retrofitting is facilitated by the feed-through electrical arrangement, which requires minimum installation requirements. The 24 volt DC control logic may be modified for Sink or Source control through the DIP switching, and speed can be controlled by a 0 to 10 volt or 4 to 20 milliamps input that is electrically separated from the drive.