Allen-Bradley 25A-D4P0N104

Allen-Bradley's manufactured 25A-D4P0N104 variable frequency AC drive is a PowerFlex 523. This Drive is proficient in speed and torque regulation using a number of control techniques, including volts/hertz (V/Hz) and Sensorless Vector Control (SVC) economizer mode. The 25A-D4P0N104 has a Frame A that may be mounted directly to the panel through the included mounting tabs or via a conventional DIN rail. It should be fitted in an enclosure with an IP20 / NEMA UL Type Open protection classification. It is critical to consider the vibration and shock resilience of a DIN rail while installing. Install this Drive directly to the enclosure to get slightly greater resistance than with DIN rail installation.

In general, a variable frequency AC drive is referred to as a Variable Frequency Drive (VFD), a Variable Speed Drive (VSD), an Adjustable Speed Drive (ASD), a frequency inverter, or just a drive. All of these phrases relate to a device capable of performing main speed control, torque control, and energy conservation, such as the 25A-D4P0N104. To save energy, the 25A-D4P0N104 may be set to avoid excessive inrush current production during start-up and shutdown by offering acceleration, deceleration, ramp-up, and ramp-down characteristics. Additionally, it may be utilized to reduce On/Off cycles by enabling the Drive to work effectively at low speeds, avoiding the Drive of cycling the motor on and off, hence eliminating motor hunting.

The 25A-D4P0N104 AC drive is rated at 1.5 kW or 2.0 Hp and has an input power range of 380-480VAC, 47-63 Hz. The Drive has a modest footprint and is ideal for a broad range of motor control applications. It is modular in design, with a revolutionary and changeable control core that allows for simultaneous program installation and setup. It can work at temperatures as high as 70 °C without derating and comes with a scheme consists fan kit. It is installed side by side, with a 50 millimeter (1.9 inch) essential airflow space at the bottom and top of the Drive. This module is essential for allowing low-cost networking through an integrated RS485/DSI interface. It is designed to be installed in an IP20 NEMA / Open Type chassis and has a frame size of A class. It also comes with a standard interface card and an EMC filtration option.