The Rockwell Automation 25B-A4P8N104 is an AC drive from the PowerFlex 525 series. It is advised that when customers get the drive, they inspect the box for evident damage. If there is apparent damage, consumers should immediately call the shipping firm. The 25B-A4P8N104 drive must be removed and examined thoroughly. It should be installed in accordance with the manufacturer's instructions. Users must configure the drive in such a manner that it meets all required clearances and mounting requirements. The drive's screws should be torqued to the stated value. Increased torque may cause damage to or break the screws. This drive incorporates a safe torque-off mechanism that is PLd/SIL2 Cat 3 approved. In order to begin the motor quicker than normal after an application is received by the safety system, this feature takes away rotational power from the motor without unplugging it from the drive. It also offers multiple options for motor control like voltage per hertz function, closed-loop velocity vector controller method, and sensorless vector controlling system.

Prior to switching on the drive's power, follow the safety instructions and check that all connections are secure. The drive must be installed by someone experienced with the system who can ensure proper installation. The drive requires 240 volts AC single-phase power as an input and has a maximum current rating of 4.8 amps. The drive is rated at 1.0 horsepower or 0.75 kW of power. The drive is protected from the elements by an IP20 NEMA casing. The 25B-A4P8N104 is equipped with a standard interface but does not have an EMC filter. The drive has a standard braking system. Avoid exposing the 25B-A4P8N104 drive to corrosive environments and keep it out of direct sunlight and moisture. It reaches a temperature up to 70 °C (158 °F) when in working condition and is perfect for conveyors, fans, pumps, and mixers. dirt, dust particles, and metallic particles should be kept away from the cooling fan.