The 2711-K3A10L1 from Allen-Bradley belongs to the PanelView Standard line of industrial panels. Make sure to leave an access to the back of the panel to accomplish wiring and maintenance tasks properly. The environments where the terminal will be placed must respect IEC-1131-2 pollution grade 2 (only-non conductive pollution is consented). In order to illuminate the display, the panel uses a backlight, with an assumed lifetime of 11 years of continued use. The terminal allows an user to exploit its functionalities using a set of buttons with 8 function keys (F1 … F8) which could be programmed for many functions. The internal Real-Time Clock (RTC) of the terminal manages to timestamp all important data. A connection through a network can be used to simply to transfer runtime to the system. This IDE runs on distinct Operating Systems from ME to Vista. The maximum vibration that the panel shall sustain is 2 g under 2000 hertz. Communication with additional devices, such as PLCs or SLCs, may be achieved using the DH+ slot of the system. The 2 Indicators on the back of the the panel may give the user information about communication and diagnostics of the panel. The terminal is allowed to be placed at an altitude up to 2000 meters or 6561 feet The display of the operator panel has a resolution of 128 by 64 pixels.

The Allen-Bradley 2711-K3A10L1 PanelView 300 standard operator terminal. This operator terminal can communicate with both third-party controllers and Allen-Bradley programmable logic controllers (PLC). It is compatible with the MicroLogix and Logix family of controllers, as well as PLC5 and SLC500. For data logging and historization, this module can also be used with alarm printers. The terminal also comes with full support for different commissioning tools. The Allen-Bradley 2711-K3A10L1 PanelView 300 standard operator terminal also comes with support for cursor keys and numeric entry keys. It supports ATA memory. The module has a rated power supply input of 24 volts DC. The integrated flash memory on this module is 240 kilobytes. The display on this module comes with support for liquid crystal display (LCD) technology. The terminal's LED backlight has an approximate lifespan of 100,000 hours. The display screen has an effective viewing area of 73 x 42 mm (2.87 x 1.67 inches), measured in width by height. It comes with an RS-232 printer port and a DeviceNet communication port. The terminal belongs to the 2711 PanelView standard operator terminal series from Allen-Bradley. The essential parts of this module are a keypad assembly, a 3-inch monochrome screen, and several communication ports. The terminal has an approximate weight of 673 g (1.48 lb) and measures 197 x 140 x 82 mm (7.76 x 5.53 x 3.21 in), measured in height by width by depth.