The 2711-K5A2 from Allen-Bradley is featured in the PanelView Standard series of terminals. The model allows the user to exploit its features using a keypad interface with 10 function buttons from F1 to F10 that could be configured for different purposes. Make sure to allow a way to the behind of the terminal to perform maintenance and troubleshooting responsibility right. The module must be installed in an area with IEC-1131-2 pollution grade which means that only non-conductive contamination will present itself. The engineer shall guarantee enough room in the case of the equipment to obtain proper ventilation. The model needs to installed no higher than 2000 meters in order to work correctly. The system uses a DH-485 slot to share data with PLCs or analogous devices. The Allen-Bradley 2711-K5A2 has a 4.72 by 2.36 inches monochromatic LCD display. In order to brighten the screen, the system uses an LCD backlight, whose nominal lifetime of 4200 days of continued use. Download of the program to the module is possible over the network using a direct connection. The panel shall withstand vibrations under 2 g at 2000 hertz. The allowed temperature for the device is 0-55 degrees Celsius. This model allows the use of a memory card for program backup.

The Allen-Bradley 2711-K5A2 is an operator terminal with an integrated keypad input interface, display area, communication connection, and internal memory from Allen-Bradley. The small construction of this electrical gadget allows for flush installation to an industrial-rated container. The keypad input interface on the 2711-K5A2 is made up of ten (10) function keys that take local and global assignments, allowing every button to be used for a specified purpose or accept variable assignments. In addition to the function keys, the keypad assembly includes a numeric key set for entering numerical variables and constants, as well as navigation keys for highlighting relevant items on the screen. A 5.5-inch monochrome screen with a display size of 120 × 60 mm (4.75 x 2.38 in.), and a resolution of 256 x 128 pixels is also included with this operator terminal. It comes with a changeable internal backlight that is rated for 100,000 hours of use. This program allows you to create a graphical user interface without having to utilize any real hardware. Internal testing may be performed without the need for physical hardware, which reduces and increases engineering time. The 2711-K5A2 includes a 170KB internal Random Access Memory (RAM) and a 240KB non-volatile memory that is used to keep programs and system data including trends, logs, and user manuals. Internal testing may be performed without the need for physical hardware, which reduces and increases engineering time. The 2711-K5A2 features a 170KB internal Random Access Memory (RAM) and a 240KB non-volatile memory that is used to keep programs and system data including trends, logs, and user manuals. The user can interface with other machines via this outdated operator terminal. A 5.5-inch monochrome LCD blue mode screen is included on this PanelView gadget. The PanelBuilder 32 program is used to configure the 2711-K5A2 application. It includes a built-in DH-485 communication port. The integrated keypad on the front panel of the gadget allows the user to control the device. Its DH-485 communication connection may be used to communicate with SLC and MicroLogix controllers, as well as a DH-485 network or a Wallmount Power Supply. The 2711-K5A2 terminal requires 120 volts of AC electricity to operate. This unit features 240 KB of nonvolatile memory and 170 KB of application runtime memory. The internal backlight replacement part number for this device is 2711-NL1. The terminal's approximate shipping weight is 6 pounds, and its dimensions are 14 x 11 x 8 inches.