The Allen-Bradley 2711-T10C8 terminal is a device that is used to create an interactive graphic interface between the operator and the components of an industrial machine. The device facilitates the translation of the user’s requirements into functions and processes that can be implemented by logic controllers and other components of the system. The system’s components can communicate with the operator panel over a DH+ network that can be configured using the configuration mode menu that is available in the terminal’s system architecture. The network can be used to relay instructions to various machine components and ensure that the automation system satisfies the intended requirements and objectives of the industrial process. The DH+ network also enables the user to communicate with a programmable logic controller (PLC) or a synchronous link controller (SLC) and actuate machine functions in an efficient manner. The 2711-T10C8 operator panel requires an input power supply of 24 volts of direct current. A circuit breaker with a maximum power rating of 15 amperes must be used to ensure the safety of the system. The panel is housed in a NEMA Type 12/13 enclosure that is designed to ensure that adequate space and ventilation are available to facilitate airflow and ease of maintenance. The COMM status indicators and fault status indicators provided with the terminal package facilitate immediate troubleshooting and ensure that the device is able to function in a seamless and effective manner.

Part number 2711-T10C8 by Allen-Bradley is a PanelView 1000 standard operator terminal. Aside from connecting with machine controls, this operator interface terminal can enable the operators to enter information and instructions through its embedded 10-inch touchscreen. This screen can display colored graphics and has a display size of 8.3 inches x 6.2 inches. This touch screen display has an estimated actuation lifespan of one million (1,000,000) presses. This PanelView 1000 standard operator terminal has an available memory consisting of 1008 kilobytes (KB) of non-volatile flash memory, as well as 310 kilobytes (KB) of RAM, or random access memory. This terminal should be operated within an environment where the temperature ranges from 0 to 55 degrees Celsius, or 32 to 131 degrees Fahrenheit. When storing this terminal, the temperature should range from -25 to 70 degrees Celsius, or the equivalent range of -13 to 158 degrees Fahrenheit. The Allen Bradley 2711-T10C8 PanelView 1000 operator interface terminal has a rated heat dissipation of 39 watts, or the equivalent of 132 BTU/hr. There is a limit on how much vibration the 2711-T10C8 can withstand, which is 2 g at up to 2000 hertz. Additionally, this module is designed to handle shocks of up to 15 G while operating and 30 G when not operating. To ensure adequate ventilation, wiring, and working space, this operator terminal requires a minimum clearance of 51 millimeters, or 2 inches, on all sides of the device. This operator terminal was designed to be operated at altitudes of up to, but not exceeding, 2000 meters, or 6561 feet.