The Allen-Bradley 2711P-B10C4A8 PanelView Plus 7 graphic color terminal provides a 15 inch XGA active-matrix thin-film transistor (TFT) with a liquid crystal (LCD) display which has a resolution of 1024 x 768 pixels. This PanelView color terminal operates with the analog resistive touch screen which provides a durable and accurate touch monitoring for industrial applications. The Allen-Bradley 2711P-B10C4A8 terminal contains two type A USB host 2.0 ports, one type B USB 2.0 device port and Two 10/100Base-T Ethernet communication ports to monitor devices that are connected to ControlLogix 5370 and CompactLogix controllers. The Allen-Bradley 2711P-B10C4A8 terminal includes 512 megabytes random access memory (RAM) for runtime applications and 512 megabytes nonvolatile flash memory. The Allen-Bradley 2711P-B10C4A8 supports an SD card slot for external storage to save and store applications.

This 2711P-B10C4A8 PanelView Plus 7 terminal contains a red LED indicator which indicates hardware issues and a green LED indicator for the communication process. This color terminal includes an audio output port which can be linked to a 4 ohms or 8 ohms amplifier or speaker. The Allen-Bradley 2711P-B10C4A8 color touch screen terminal supports an input voltage rating of 100/240 volts AC with a maximum power consumption of 105 volt-amperes. The 2711P-B10C4A8 terminal is designed to meet the NEMA, IP and UL Type enclosure ratings. The Allen-Bradley 2711P-B10C4A8 should be installed in panels or enclosure to preserve the internal circuitry. This PanelView terminal can operate at a temperature range of 0 degrees to 55 degrees Celsius (32 degrees to 131 degrees Fahrenheit) for applications and weighs approximately 3.69 kilograms (8.14 pounds) while shipping.

The 2711P-T15C22A9P can connect to a DLR (device level ring) network thanks to its two embedded Ethernet ports. A DLR network is used to connect automation devices together and is a single-fault tolerant ring network. PanelView Plus 7 Performance terminals only operate as a ring node on the DLR network, as opposed to a supervisor node. When a fault is detected in a terminal, a DLR network topology will automatically convert itself into a linear network topology. When this happens, the conversions to the new topology do not interrupt communication of data to the network. The terminal provides operators with the ability to enable integrity checks of the terminals .mer applications or the runtime files. Users can set these checks to perform automatically. Any errors, warnings, or information messages are recorded in a file. Operators can then view and then clear items from the log. Runtime files allow applications to run on the terminal. If the 2711P-T15C22A9P is not functioning correctly, operators can review the logs and identify the error in the runtime file. The 2711P-T15C22A9P also gives users the ability to view various information relating to the terminal in a read-only format. Operators can view the terminal’s total power on time in minutes, the current temperature of the processor, battery voltage and state, the memory that is being allocated and used, and the RAM usage during runtime. The display screen of the 2711P-T15C22A9P has an aspect ratio of 4:3 and a typical brightness of 300 nits. The screen is lit by a white LED backlight that has a 50,000-hour life minimum if operated at 40 degrees Celsius (104 degrees Fahrenheit).