Allen-Bradley MPL-A430H-HJ72AA

Manufactured by Allen-Bradley, part number MPL-A430H-HJ72AA is an MP-Series low inertia servo motor. This Allen-Bradley servo motor is a 230 volt motor, with a rated speed of 3500 revolutions per minute (rpm). The rated output of this device is 1.8 kW. This specific low inertia motor has a magnetic stack length of 3 inches. Additionally, the frame size on the Allen-Bradley MPL-A430H-HJ72AA is 115 millimeters long. The rotor inertia for this product is 0.00038 kg-m², or 0.0033 lb-in.-s². The Allen-Bradley MPL-A430H-HJ72AA has a continuous stall torque of 6.21 Nm, which is equivalent to 55 pounds to an inch. The peak stall torque of this motor is 19.8, or 175 pounds to an inch. Additionally, the continuous stall current for the Allen-Bradley MPL-A430H-HJ72AA is 12.2 amperes, with 45.0 amperes being the peak stall current. 

Amazingly, this Allen-Bradley Servo motor is able to meet the demands of high-performing motion systems, as it has been manufactured to be compact and highly dynamic. The MP-Series Low-Inertia Motors are brushless and use unique design characteristics to effectively reduce the size of the motor. These motors are generally used with the Allen-Bradley Kinetix families of servo drives. This motor's innovative winding technology allows it to achieve up to forty percent (40%) higher torque per unit when compared to other servo motors. Included in the Allen-Bradley MPL-A430H-HJ72AA is a twenty-four (24) volt brake option. Additionally, the On-board memory of the device allows the motor to keep its identity. This MP-Series Low Inertia Motor has a recommended temperature range for operation of zero (0) to forty (40) degrees Celsius, or thirty-two (32) to one hundred and four (104) degrees Fahrenheit. 

The MPL-A430H-HJ72AA is a brushless low inertia servo motor that is able to deliver a significantly higher level of torque with a reduced motor size. The motor features smart motor technology that has an on-board memory that ensures that the motor retains its identity. The MPL-A420P-HJ72AA also contains a communication link that automatically reports the identity to the system upon the motor’s startup. This is turn reduces the commissioning time. The MPL-A420P-HJ72AA offers both rated speed and max speed of 3500 rpm. The continuous stall torque and peak stall torque of the motor are 6.21N-m (55lb-in) and 19.8 N-m (175lb-in) respectively, while the continuous stall current amperes and peak stall current amperes register at 12.2 and 45.0 respectively. The motor’s rotor inertia registers at 0.00038 kg-m² or 0.0033lb-in-s². The motor rated output for the MPL-A430H-HJ72AA is 1.8kW and the unit weighs 5.5kg or 12lb. The motor can operate in a temperature range of 0-40 degrees Celsius or 32-104 degrees Fahrenheit. The MPL-A430H-HJ72AA features MPL series standard improved winding insulation material. This material results in enhanced thermal management and heat transfer, which further results in higher performance. When installing the motor, it should not be enclosed unless there is a supply of forced air blown across the motor for cooling. Having a fan blowing cool air on the unit will increase performance. The motor should not be kept close to other heat producing devices. Reduce electromagnetic interference by filtering AC power, shielding and separating signal carrying lines, and practicing good grounding techniques..