Allen-Bradley MPL-A430P-MJ74AA

Part number MPL-A430P-MJ74AA is an MP-Series low inertia servo motor. This two hundred and thirty (230) volt motor was produced by Allen-Bradley and has a speed rating of five thousand (5000) revolutions per minute (rpm). This motor's output rating is 2.2 kW. Additionally, the rotor inertia of this low inertia servo motor is 0.00038 kg-m², or 0.0033 lb-in.-s². The continuous stall torque of the Allen-Bradley MPL-A430P-MJ74AA is 5.99 Nm, or fifty-three (53) pounds to an inch (lb-in.)). This servo motor has a stall torque of 19.8 Nm, or one hundred and seventy-five (175) pounds to an inch (lb-in.) at peak. Also, the stall current of this servo motor is 16.8 amperes continuous. At its peak, the Allen-Bradley MPL-A430P-MJ74AA has a stall current of sixty-seven (67.0) amperes. Additionally, this servo motor has a recommended temperature range of zero (0) to forty (40) degrees Celsius, or thirty-two (32) to one hundred and four (104) degrees Fahrenheit, to be operational. 

This brushless servo motor, which has a frame size measuring one hundred and fifteen (115) millimeters, as well as a stack length measuring three (3) inches, is capable of delivering higher torque when compared to other types of servo motors. To be more specific, the Allen-Bradley MPL-A430P-MJ74AA is able to yield up to 40% higher torque due to the innovative design of the servo motor. Additionally, this MP-Series Low Inertia Servo Motor is highly dynamic, as well as compact, allowing it to meet the demands of motion systems that run on high-performance. The Allen-Bradley MPL-A430P-MJ74AA is typically used with the Allen-Bradley Kinetix servo drives families. This servo drive is also equipped with a twenty-four (24) volt brake option, which is integral to its design. 

The MPL-A430P-MJ74AA comes with an absolute multi-turn feedback encoder. This is able to provide high-resolution feedback within 4096 turns. The electromechanical design does not require a battery. This servo motor also comes equipped with a 24 VDC brake. The max backlash when the brake of the motor is engaged is 37 arc minutes, while the holding torque of the brake is 10.2 N-m or 90 lb-in. The coil current at 24 VDC is 0.0576-0.704 A. When measuring brake response time for the MPL-A430P-MJ74AA, the release measured at 110 ms. Brake rotor inertia registered at 0.00042 kg-m² or 0.0027 lb-in-s². The brake for the motor has a weight of 7.9 kg or 16 lbs. The radial load force of the MPL-A430P-MJ74AA is 49 kg or 108 lb. The axial load rating is 19 kg or 42 lb, while the axial load force with a zero radial load is 25 kg or 55 lbs. The compact motor has a rated output of 2.2 kW and a rotor inertia measuring at 0.00038 kg-m² or 0.0033 lb-in-s². Continuous stall torque amounts to 5.99 Nm or 53 lb-in, while peak stall torque can go up to 19.8 Nm or 175 lb-in. Measured in amperes, the MPL-A430P-MJ74AA measures a continuous stall current of 16.8 and a peak stall current of 67.0. The weight of this servo motor is approximated to be 5.5 kg or 12 lbs. For ease of installation, a mounting pilot is included with the motor. The preferred fasteners for the MPL-A430P-MJ74AA are stainless steel and installation must use equipment and installation practices that promote electromagnetic compatibility and safety.