GE / IP FANUC Series 90/30 En stock

Correo electrónico

[email protected]

Llama ahora

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1747-L30A

Fabricante: Allen Bradley - PLC
tipo de producto: PLC/Programmable Logic Controller
Número de pieza: 1747-L30A
Serie: SLC 500
UPC: 10662468325827

Descripción:

El Allen-Bradley 1747-L30A es un controlador lógico programable. Este aparato tiene una potencia de línea de ciento veinte ( 120 ) a doscientos cuarenta ( 240 ) voltios de corriente alterna. Este dispositivo tiene una configuración de E/S de entrada de CA de 120 voltios con una salida de relé de CA/CC. Este dispositivo tiene una duración de batería de cinco ( 5 ) años. El tiempo de escaneo típico para este dispositivo es de ocho ( 8 ) milisegundos. La temperatura de funcionamiento de este dispositivo oscila entre 0 y 60 grados centígrados.



Automation Stop NO es un distribuidor autorizado de este fabricante y, por lo tanto, no se aplica la garantía del fabricante. El producto viene con Automation Stop's 1 año de garantía.

Reformado

$1,416.00

Disponible: 10

¿Qué se reacondiciona?

Tu pedido se enviará por. ¿Lo necesitas más rápido?

  Pagar

Aceptamos tarjetas de crédito de los principales proveedores, así como PayPal.

  Barco

Ofrecemos envíos a todo el mundo con UPS y DHL.

  Garantía

Estamos orgullosos de ofrecer una garantía de parada de automatización de un año en la mayoría de los productos.

The Allen-Bradley Programmable Logic Controller 1747-L30A comes with an integrated power supply and can be expanded with two slots. There are eighteen 120 volts AC and twelve AC/DC relays. These can be increased using the additional chassis up to sixty four. Based on the power supply, the maximum turn-on time of the controller is 35 milliseconds and the maximum turn-off time is 45 milliseconds. The controller requires 85 to 265 volt AC at 47 to 63 Hz resulting in about 0.27 Watts per point. The inrush rating is 30 Amperes. The wire size used is #14 AWG maximum which provides an I/O electrical/optical isolation of 1500 V AC at 60 seconds. The controller memory has an optional recovery system of EEPROM or UVPROM. The internal memory of this processor uses a capacitor. The processor memory can use up to one thousand use programs with a scan time of 8 milliseconds and bit execution speed of 4 microseconds.

The scan time can increase with the program complexity. The program hold-up time in case of power loss is 20 to 700 milliseconds. The installation hardware is modular where the chassis can be installed to a mounting plate inside an enclosure. Grounding is required to be completed for safe operation of the system. Generally, NEMA rated enclosures and forced air circulation are used. The weight of the unit is about 0.37 lbs. and dimensions are 5.72 x 1.37 x 5.15 inches. The allowable operating temperature is 0 to 60 degrees Celsius and the storage temperature range is -40 to 85 degrees Celsius.

The Allen-Bradley 1747-L30A has a typical battery life of five (5) years. The twenty-four (24) volt direct current user power output current is 200 milliamperes. Additionally, the twenty-four (24) volt direct current user power output voltage ranges from 20.4 to 27.6 volts DC (direct current), or 24 (twenty-four) volts DC plus or minus fifteen (15) percent. The vibration statistics are also something to take note of. These statistics involve this device's displacement, acceleration, and duration. The displacement of the device is 0.015 inch, peak-to-peak at a frequency range of five (5) to fifty-seven (57) Hz (hertz). The acceleration of this device in terms of vibration is 2.5 Gs at a frequency of fifty-seven (57) to two thousand (2000) hertz. The duration of this device's vibration is one (1) hour per axis, on the x, y, and z axes. Another thing to note, when storing the Allen-Bradley 1747-L30A, be aware that the relative humidity range should be five (5) percent to ninety-five (95) percent without condensation. 

The line power of this Programmable Logic Controller ranges from one hundred and twenty (120) volts alternating current to two hundred and forty (240) volt alternating current. The I/O Configuration for this device is one hundred and twenty (120) volts alternating current input and an AC/DC relay output. This device does not have a high-speed counter. This device is equipped with LED indicators. These indicators read as the following: "power," "PC run," "CPU fault," "forced I/O,' and "battery low." This product has 0.27 watts per point, with a minimum wattage of 12.7 and a maximum wattage of 19.2. 

Technical Specifications

Tipo de módulo Controlador fijo
Serie SLC 500
Entradas (18) 120 V CA
Memoria 1K instrucciones
Salidas (12) relé AC / DC
Puerto de comunicación DH485
Contador de alta velocidad No
Poder de línea 120/240 V CA
Cable Belden 9463
Poder del usuario 24 voltios - 200 mA
Conectores Conector Phoenix de 6 pines
Peso 0,37 libras
Dimensiones 5.72 X 1.37 X 5.15 pulgadas
Temperatura de funcionamiento 0 hasta 60 ° C
Ofrecemos envío de UPS. Incluyendo Ground, 2nd Day Air, Next Day Air y Early AM. Algunos de nuestros productos tienen un tiempo de entrega corto, así que contáctenos si necesita algún artículo más rápido que el tiempo de entrega que se muestra. Si necesita pedir un artículo internacionalmente, contáctenos antes de pagar para que podamos obtener una cotización de envío. Podemos enviar UPS o DHL internacionalmente. También podemos enviar en su número de cuenta de UPS o FedEx.
Si se encuentra que el artículo está defectuoso dentro de los 30 días posteriores a la fecha de la factura, se puede emitir un reembolso completo. Si se descubre que un artículo está defectuoso debido al uso y desgaste normales después de 30 días, pero dentro del período de 1 año, la Garantía de parada de automatización dicta el curso de acción apropiado. Después del período de 30 días, Automation Stop se reserva el derecho de decidir entre reembolso, reparación o reemplazo con un producto idéntico. Debido al gran volumen de envíos entrantes y salientes en el día a día, lamentablemente no podemos aceptar devoluciones de artículos pedidos por error o números de pieza pedidos incorrectamente. Si se aprueba una excepción especial, se cobrará una tarifa de reposición del 20%. Si tiene alguna pregunta, contáctenos en [email protected].

Preguntas más frecuentes

Pregunta: ¿Automation Stop ofrece reparaciones en el 1747-L30A?

Respuesta: Si. Ofrecemos reparaciones para el 1747-L30A y viene con nuestra garantía de parada de automatización de 1 año.


Pregunta: ¿Qué tipo de garantía viene con Allen Bradley - PLC y 1747-L30A?

Respuesta: Si compra el 1747-L30A a través de Automationstop.com, viene con nuestra garantía de 1 año y sin otras garantías.


Pregunta: ¿Puedo comprar el 1747-L30A en línea ?

Respuesta: Si. Automation Stop vende el 1747-L30A en línea y puede verificar la cantidad y condición que se enumeran arriba.


Pregunta: ¿Cuál es el fabricante del 1747-L30A?

Respuesta: El 1747-L30A está fabricado por Allen Bradley - PLC .


Pregunta: ¿Qué tipo de producto es el 1747-L30A?

Respuesta: El 1747-L30A es parte de la serie SLC 500.


Question: What is the Cable of the Rockwell Automation 1747-L30A?

Answer: The Cable of the Rockwell Automation 1747-L30A is Belden 9463.


Question: What Communication port does the Rockwell-Automation 1747-L30A have?

Answer: The Communication port of the Rockwell-Automation 1747-L30A is DH485.


Question: What is the Connectors of the 1747-L30A?

Answer: The Connectors of the Allen Bradley 1747-L30A is 6-Pin Phoenix Connector.


Question: What is the Dimensions of the Allen Bradley Automation 1747-L30A?

Answer: The Dimensions of the Allen Bradley Automation 1747-L30A is 5.72 X 1.37 X 5.15 inch.


Question: Does the 1747-L30A have a High-speed counter?

Answer: No.


Question: What is the Inputs of the Rockwell Automation 1747-L30A?

Answer: The Inputs of the Rockwell Automation 1747-L30A is (18) 120 V alternating current (AC).


Question: What Line power does the Allen Bradley-Rockwell Automation 1747-L30A have?

Answer: The Line power of the Allen Bradley-Rockwell Automation 1747-L30A is 120/240 V alternating current (AC).


Question: What random-access memory (RAM) does the 1747-L30A have?

Answer: The random-access memory (RAM) of the Allen Bradley-Rockwell Automation 1747-L30A is 1K instructions.


Question: What Module Type is included with the 1747-L30A?

Answer: The 1747-L30A has a Fixed controller Module Type.


Question: What is the Operating temperature of the 1747-L30A?

Answer: The 1747-L30A has a Operating temperature of 0 to 60°C.


Question: What is the Outputs of the 1747-L30A?

Answer: The 1747-L30A has a Outputs of (12) AC (alternating current)/DC relay.


Question: What is the User power of the 1747-L30A?

Answer: The Allen Bradley/Rockwell Automation 1747-L30A has a User power of 24 Volts - 200 mA.


Question: What is the Weight of the Rockwell Automation 1747-L30A?

Answer: The Rockwell Automation 1747-L30A has a Weight of 0.37 lbs..


Información de la serie para 1747-L30A

Para obtener información adicional sobre 1747-L30A consulte la hoja de datos o el manual. También consulte el manual en PDF para ver todos los diagramas de cableado, compatibilidad, resolución de problemas, especificaciones, instrucciones de instalación y accesorios (como baterías, bloques de terminales o cables) relacionados con1747-L30A.

Parte de revisión # También conocido como Disponibilidad
1747-L30A/A 1747-L30A Ser A, Serie A, Rev A Solicitar presupuesto

Errores ortográficos comunes:

  • 1747-L3OA
  • I747-L30A
  • I747-L3OA

Automation Stop vende excedentes de productos usados. Automation Stop no es un distribuidor, afiliado o representante autorizado de las marcas que comercializamos. Productos vendidos por Automation Stop ven con Automation Stop’s 1 año de garantía y no vienen con la garantía del fabricante original. Las marcas comerciales designadas, los nombres comerciales y las marcas que aparecen en este documento son propiedad de sus respectivos dueños. Este sitio web no está sancionado ni aprobado por ningún fabricante o nombre comercial mencionado.

Rockwell Descargo de responsabilidad: El producto se utiliza excedente. Automation Stop no es un distribuidor autorizado de excedentes ni un afiliado del fabricante de este producto. El producto puede tener códigos de fecha más antiguos o ser una serie más antigua que la disponible directamente de fábrica o distribuidores autorizados. Porque Automation Stop no es un distribuidor autorizado de este producto, no se aplica la garantía del fabricante original. Si bien muchos productos de PLC de Allen-Bradley ya tienen firmware instalado, DO Supply no garantiza si un producto de PLC tendrá o no firmware y, si tiene firmware, si el firmware tiene el nivel de revisión que necesita para su solicitud. Automation Stop tampoco garantiza su capacidad o derecho para descargar u obtener firmware para el producto de Rockwell, sus distribuidores o cualquier otra fuente. Automation Stop tampoco garantiza su derecho a instalar dicho firmware en el producto. Automation Stop no obtendrá ni suministrará firmware en su nombre. Es su obligación cumplir con los términos de cualquier Acuerdo de licencia de usuario final o documento similar relacionado con la obtención o instalación de firmware.

CIMA