Allen-Bradley 1769-OV32T

The Allen-Bradley 1769-OV32T compact DC solid-state module has 32 digital terminated outputs. The 1769-OV32T operates between 10.2 volts and 26.4 volts DC. This module can be employed by controllers such as the CompactLogix controller or the MicroLogix 1500 controller. The 1769-OV32T module can be employed in several applications mainly in the industrial field. The 1769-OV32T module can be employed with a 1769-ADN DeviceNet adapter or with a 1769-AENTR Ethernet adapter. The 1769-OV32T module provides the flexibility during the installation process using two mounting M4 or #8 screws for panel mounting which should be well-grounded or on EN 50 022 - 35 x 7.5 or EN 50 022 - 35 x 15 DIN rails. The on-state current for this module is 1 milliamp and the output delay is 1 millisecond. The Allen-Bradley 1769-OV32T module includes both keyed 40-pin female connector and crimp-type pins which permit to connect I/O devices to this module using either a 40-conductor cable or individual wires. This Allen-Bradley 1769-OV32T DC solid-state terminated output module can be supplied through 1769 Compact I/O power supplies such as 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 power supplies except when connected to a MicroLogix 1500 base with a current consumption of 220 milliamps. The 1769-OV32T Allen-Bradley module can be connected easily to either the controller or to an adjacent I/O module before or after mounting. The surge current that the module can handle is 2 amps. The 1769-OV32T 32-point module is intended for use in a mainly industrial environment that is clean and dry (Pollution degree 2) and to circuits not exceeding Over Voltage Category II (IEC 60664-1). The 1769-OV32T digital terminated output module provides two groups with 16 points per group. This module weighs approximately 450 grams (0.992 pounds) while shipping. This Allen-Bradley module works properly at 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).